Show simple item record

Comparación de propiedades de enclavamiento bloques prefabricados pavimento curado en diferentes condiciones

dc.creatorUygunoğlu, Tayfun
dc.date2016-08-31
dc.identifierhttp://revistadelaconstruccion.uc.cl/index.php/RDLC/article/view/12872
dc.descriptionIn this study, influence of curing condition and fly ash content on properties of pre-fabricated concrete interlocking blocks (PCIBs) wereinvestigated. The blocks were produced with crushed sand stone (fine) and crushed stone (coarse) as aggregate. Also, fly ash was added to mixturesin different ratio by replacing the cement from 0 to 30%. PCIBs were cured in three different types as steam cure, water-pool cure and wet cure.Compressive strength, tensile splitting strength, density, apparent porosity, water absorption by weight and abrasion resistance of PCIBs was determined. When comparing the PCIBs, the use of wet cure results in lower physical and mechanical properties after 28 days. By contrast, water-pool and steam cure gives better result on mechanical and physical properties. Also, replacement of cement with fly ash (from 10% to 20%) has a significant effect in increasing important properties of PCIBs.en-US
dc.descriptionEn este estudio, la influencia de la curación de la condición y el contenido de cenizas volantes sobre las propiedades del hormigón prefabricadoBloques entrelazados (PCIBs) fueron investigados. Los bloques fueron producidos con arena de piedra triturada (fina) y piedra triturada (grueso)como agregado. Además, cenizas fueron añadidas a las mezclas en diferente relación, reemplazando el cemento desde 0 a 30%. Los PCIBs fueroncurados en tres tipos diferentes como: cura de vapor, piscina de agua cura y cura húmeda. Resistencia a la compresión, resistencia a la tracciónindirecta, densidad, porosidad aparente, absorción de agua por el peso y la resistencia a la abrasión de PCIBs fue determinadas. Cuando secomparan los PCIBs, el uso de la cura húmeda se traduce en la reducción de propiedades físicas y mecánicas, después de 28 días. Por el contrario, lapiscina de agua y vapor cura da mejor resultado en las propiedades mecánicas y físicas. Además, la sustitución de cemento con ceniza volante (del10% al 20%) tiene un efecto significativo en el aumento de propiedades importantes de PCIBs.es-ES
dc.formatapplication/pdf
dc.languageeng
dc.publisherEscuela de Construcción Civil de la Pontificia Universidad Católica de Chileen-US
dc.relationhttp://revistadelaconstruccion.uc.cl/index.php/RDLC/article/view/12872/11462
dc.rightshttp://creativecommons.org/licenses/by-nc-nd/4.0en-US
dc.sourceRevista de la Construcción. Journal of Construction; Vol. 15 No. 2 (2016): Revista de la Construcción. Journal of Construction; 125-134en-US
dc.source0718-915X
dc.subjectcuradoes-ES
dc.subjectbloques de pavimentoes-ES
dc.subjectprefabricadoes-ES
dc.subjectfuerzaes-ES
dc.subjectadición minerales-ES
dc.subjectCuringen-US
dc.subjectpavement blocksen-US
dc.subjectprefabricateden-US
dc.subjectstrengthen-US
dc.subjectmineral admixtureen-US
dc.titleComparison of properties of prefabricated interlocking pavement blocks cured at different conditionsen-US
dc.titleComparación de propiedades de enclavamiento bloques prefabricados pavimento curado en diferentes condicioneses-ES
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/publishedVersion


This item appears in the following Collection(s)

Show simple item record