Show simple item record

dc.creatorSancak, Omer Fatih
dc.creatorOzyurt, Muhammet Zeki
dc.date2022-12-29
dc.date.accessioned2023-03-08T16:44:05Z
dc.date.available2023-03-08T16:44:05Z
dc.identifierhttps://revistadelaconstruccion.uc.cl/index.php/RDLC/article/view/43691
dc.identifier10.7764/RDLC.21.3.767
dc.identifier.urihttps://revistaschilenas.uchile.cl/handle/2250/222652
dc.descriptionThis study focused on whether industrial iron chips waste can be recycled by using them in the production of reinforced concrete cantilever beams. The amount of aggregate in the range of 0-4 mm in the concrete used in the production of cantilever beams was determined. And this amount was reduced by 10%, 20%, and 40% and replaced with iron chips. Cantilever beams have been produced in two different ways as under-reinforcement and over-reinforcement by changing the diameters of the tension reinforcement. Thanks to the experimental setup, the cantilever beams were loaded at their endpoints. In the experimental study, the load-displacement curves of the cantilever beams were obtained. According to the findings obtained in the study, under-reinforced cantilever beams behaved more ductile than over-reinforced cantilever beams. Cantilever beams with 40% iron chip additive reached the highest strength and exhibited the most brittle fracture examples. Cantilever beams containing 10% and 20% iron chip additives increased their ductility values up to 14.54% and decreased ​​their strength up to %17.27 compared to reference cantilever beams.en-US
dc.formatapplication/pdf
dc.languageeng
dc.publisherEscuela de Construcción Civil de la Pontificia Universidad Católica de Chileen-US
dc.relationhttps://revistadelaconstruccion.uc.cl/index.php/RDLC/article/view/43691/45989
dc.rightsCopyright (c) 2022 Omer Fatih Sancak, Muhammet Zeki Ozyurten-US
dc.rightshttp://creativecommons.org/licenses/by-nc-nd/4.0en-US
dc.sourceRevista de la Construcción. Journal of Construction; Vol. 21 No. 3 (2022): Revista de la Construcción. Journal of Construction; 767-777en-US
dc.source0718-915X
dc.subjectReinforced concreteen-US
dc.subjectcantilever beamen-US
dc.subjectiron chip additiveen-US
dc.subjectductilityen-US
dc.subjectreinforced concreteen-US
dc.subjectstructural behavior.en-US
dc.titleThe effect of iron chip additive on structural behavior of under-reinforced and over-reinforced cantilever beamsen-US
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/publishedVersion
dc.typeresarchearticleen-US


This item appears in the following Collection(s)

Show simple item record