Show simple item record

dc.creatorLomagno, Jorge
dc.creatorGotelli, Genaro
dc.date2014-12-24
dc.date.accessioned2023-03-13T20:58:08Z
dc.date.available2023-03-13T20:58:08Z
dc.identifierhttps://revistas.ubiobio.cl/index.php/MCT/article/view/1508
dc.identifier.urihttps://revistaschilenas.uchile.cl/handle/2250/223910
dc.descriptionLos entramados estructurales hechos de madera maciza y tableros requieren que las uniones tablero- madera puedan conservar una adecuada resistencia mecánica, durante el tiempo y las condiciones de clima en que deban prestar servicio. En este trabajo se determino la resistencia a carga lateral mantenida por uniones clavadas de tableros de hojuelas orientadas (OSB) y madera de Pinus radiata D.Don (pino radiata) luego de ser sometidas a un ciclo de envejecimiento acelerado (CEA). Se comparó la resistencia mecánica mantenida por uniones sometidas a un CEA, con la resistencia y la rigidez mantenidas por probetas de tablero OSB sometidas al mismo ciclo de envejecimiento y luego ensayadas a flexión. En cada propiedad evaluada se fabricaron pares de probetas, en las cuales una probeta he sometida a envejecimiento y luego ensayada mecánicamente, mientras que la otra fue sometida a ensayo mecánico sin envejecimiento previo. El método de envejecimiento aplicado fue de 2 horas de inmersión en agua hirviendo y 1 hora en agua a 25°C. El porcentaje de resistencia mantenida por las uniones clavadas he entre 70 y 73%, lo cual es 35 % mayor que el módulo de rotura a flexión (MOR) mantenido por los tableros OSB. AbstractThe use of oriented strand board panel (OSB) in sheathings of structural walls needs that the OSB-timber joints are able to maintain strength enought during their service life. In this work it was determined the lateral load resistance maintained by OSB panel and solid wood nailed joints submitted to an aging test. A comparison was done between the maintained resistance of the evaluated joints and the modulus of rupture (MOR) and modulus of elasticity (MOE) maintained for the OSB panels after the same aging test. In each evaluated property were tested probes with and probes without aging. The aging test selected was the 2 hours boil-1 hour soak aging test. A good behaviour of the nailed joints resistance was observed in both directions of the board. The joints of OSB panels maintained 35 % more resistance than the bending resistance of the OSB panel, both after the same accelerated aging test.es-ES
dc.formatapplication/pdf
dc.languagespa
dc.publisherUniversidad del Bio-Bioen-US
dc.relationhttps://revistas.ubiobio.cl/index.php/MCT/article/view/1508/1454
dc.rightsCopyright (c) 2015 Jorge Lomagno, Genaro Gotellien-US
dc.sourceMaderas-Cienc Tecnol; Vol. 5 No. 1 (2003); 44-50en-US
dc.sourceMaderas-Cienc Tecnol; Vol. 5 Núm. 1 (2003); 44-50es-ES
dc.source0718-221X
dc.source0717-3644
dc.subjectpino radiataes-ES
dc.subjecttablero OSBes-ES
dc.subjectresistencia lateral de uniones clavadases-ES
dc.subjectenvejecimiento de unioneses-ES
dc.subjectradiata pinees-ES
dc.subjectOSB panelses-ES
dc.subjectlateral resistance nailed jointses-ES
dc.subjectagingjointses-ES
dc.titleResistencia al envejecimiento de uniones clavadas de tableros de hojuelas orientadas (OSB)es-ES
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/publishedVersion


This item appears in the following Collection(s)

Show simple item record