Characterization and utilization of reed stem as a lignocellulosic resource for particleboard production

Kord, Behzad; Roohani, Mehdi; Kord, Behrouz

dc.creator	Kord, Behzad
dc.creator	Roohani, Mehdi
dc.creator	Kord, Behrouz
dc.date	2015-08-28
dc.date.accessioned	2023-03-13T20:58:10Z
dc.date.available	2023-03-13T20:58:10Z
dc.identifier	https://revistas.ubiobio.cl/index.php/MCT/article/view/2089
dc.identifier.uri	https://revistaschilenas.uchile.cl/handle/2250/223929
dc.description	The objective of this study was to investigate the use of the reed stem in manufacturing three-layer particleboard. Variable factors were mixing ratio of reed and industrial wood particles (0:100, 25:75, 50:50, 75:25 and 100:0 in the surface and middle layers), press temperature (170, 180, 190 °C) and pressing cycle time (5, 6, 7 min). Other parameters such as resin content (8% in core and 10% in faces), hardener content (2%), press closing rate (4,5 mm/min), press pressure (30 kg/cm2), board thickness (15 mm), and target density (700 kg/m3) were held constant. The physical and mechanical properties of particleboard panels including modulus of rupture, modulus of elasticity, internal bonding, water absorption and thickness swelling were determined according to the procedures of European standards. The results showed that modulus of rupture, modulus of elasticity, internal bond, water absorption and thickness swelling increased with the increase of reed particles content. The positive influence of press temperature and press time can also be seen in terms of improved physical and mechanical properties. Based on the findings of this study, we can conclude that reed stem can be used to manufacture particleboard.	es-ES
dc.format	application/pdf
dc.language	spa
dc.publisher	Universidad del Bio-Bio	en-US
dc.relation	https://revistas.ubiobio.cl/index.php/MCT/article/view/2089/1949
dc.rights	Copyright (c) 2015 Maderas. Ciencia y Tecnología	en-US
dc.source	Maderas-Cienc Tecnol; Vol. 17 No. 3 (2015); 517-524	en-US
dc.source	Maderas-Cienc Tecnol; Vol. 17 Núm. 3 (2015); 517-524	es-ES
dc.source	0718-221X
dc.source	0717-3644
dc.subject	Mechanical properties	es-ES
dc.subject	particleboards	es-ES
dc.subject	physical properties	es-ES
dc.subject	press temperature	es-ES
dc.subject	pressing cycle time	es-ES
dc.subject	reed.	es-ES
dc.title	Characterization and utilization of reed stem as a lignocellulosic resource for particleboard production	es-ES
dc.type	info:eu-repo/semantics/article
dc.type	info:eu-repo/semantics/publishedVersion

This item appears in the following Collection(s)

Maderas: Ciencia y Tecnología
[0-9]{4}

Show simple item record