Effect of different ashes from biomass olive pomace on the mechanical and fire properties of gypsum-based materials
Propiedades de diferentes cenizas de biomasa de orujo en su uso como materiales ignífugos
Author
Peceño, Begoña
Pérez-Soriano, Eva M.
Ríos, Jose D.
Luna, Yolanda
Cifuentes, Hector
Leiva, Carlos
Full text
https://revistadelaconstruccion.uc.cl/index.php/RDLC/article/view/4858510.7764/RDLC.22.1.122
Abstract
In this study, biomass ashes from different energy valorization processes and storage conditions were used to make fire-resistant materials. Some of the ashes were subjected to a carbonation process. An 80/20 ash/gypsum ratio was used in all compositions. The density and different mechanical properties (compressive and flexural strength, superficial hardness, and dynamic modulus of elasticity), as well as fire resistance properties (insulating capacity and heat absorption capacity), were evaluated at 28 days. The energy valorization had a great influence on the particle size and the Loss On Ignition (LOI) of the fly ash. By increasing both, materials with lower mechanical properties (90%) were produced. Fire resistance was similar for the different ashes tested, but 50% lower than the gypsum material. When the ashes of the materials were carbonated, the material increases compressive strength by 400% compared to ashes without the carbonation process, and the fire resistance was similar to those materials composed exclusively of gypsum, but also a source of CO2 capture is produced. En este estudio, cenizas de biomasa procedentes de diferentes procesos de valorización energética así como condiciones de almacenamiento, se emplearon para fabricar materiales resistentes al fuego. Algunas de las cenizas fueron sometidas a un proceso de carbonatación. En todas las composiciones se utilizó una relación ceniza/yeso de 80/20. A los 28 días se evaluaron densidad y propiedades mecánicas (resistencia a la compresión y flexión, dureza superficial y módulo dinámico de elasticidad), además de propiedades de resistencia al fuego (capacidad aislante y capacidad de absorción de calor). La valorización energética tuvo una gran influencia en el tamaño de partícula y la pérdida por ignición (LOI) de las cenizas volantes. Al aumentar ambos, se produjeron materiales con propiedades mecánicas más bajas. La resistencia al fuego fue similar en las diferentes cenizas ensayadas. Cuando las cenizas fueron carbonatadas, se cumplieron todos los requisitos mecánicos, con una resistencia al fuego similar a la de aquellos materiales compuestos exclusivamente por yeso, que también es una fuente de captura de CO2.