Recently added

Discrimination of wood and charcoal from six caatinga species by near-infrared spectroscopy

Nisgoski, Silvana; Ribeiro Batista, Francielli Rodrigues; Lorena Naide, Tawani; Catarina Clivati Laube, Nadia; Carolina Ribas Leão, Amanda; Inés Bolzon de Muñiz, Graciela. Maderas-Cienc Tecnol; Vol. 20 No. 2 (2018); 199-210

Influence of combined hygro-thermo-mechanical treatment on technical characteristics of poplar wood

Hajihassani, Reza; Mohebby, Behbood; Kazemi Najafi, Saeed; Navi, Parviz. Maderas-Cienc Tecnol; Vol. 20 No. 1 (2018); 117-128

Liquefaction behaviour of twelve tropical hardwood species in phenol

Kumar, Anil; Sethy, Anil; Chauhan, Shakti. Maderas-Cienc Tecnol; Vol. 20 No. 2 (2018); 211-220

Kraft scrap paper pulp as a substitute of wood chips in manufacture of particleboards resinated with hybrid pf/pmdi resin

Dukarska, Dorota; Buszka, Katarzyna; Modzelewska, Izabela. Maderas-Cienc Tecnol; Vol. 20 No. 2 (2018); 161-170

Comparison of two kiln-drying schedules for turkish hazel (Corylus colurna) lumber of 5-cm thickness

KORKUT, Süleyman; AS, Nusreta; BÜYÜKSARI, Ümit. Maderas-Cienc Tecnol; Vol. 20 No. 1 (2018); 129-138

Particularities of hollow-core briquettes obtained out of spruce and oak wooden waste

Spirchez, Cosmin; Lunguleasa, Aurel; Matei, Madalina. Maderas-Cienc Tecnol; Vol. 20 No. 1 (2018); 139-152

Efecto de la presión de prensado y la adición de lignina kraft en la producción de tableros aglomerados autoenlazados a partir de Gynerium sagittatum pretratada con vapor

Diossa, Giovanna; A. Velásquez, Jorge; C. Quintana, Germán; Gómez, Viviana. Maderas-Cienc Tecnol; Vol. 19 No. 4 (2017); 525-538

Evaluation of plastic composites made with Laccosperma secundiflorum and Eremospatha macrocarpa canes

O. Adefisan, Olufemi; Wei, Liqing; G. McDonald, Armando. Maderas-Cienc Tecnol; Vol. 19 No. 4 (2017); 517-524

Acknowledgements for reviewers 2016-2017

Ananías, Rubén. Maderas-Cienc Tecnol; Vol. 19 No. 4 (2017); 539-542

Monitoring the cell wall characteristics of degraded beech wood by white-rot fungi: Anatomical, chemical, and photochemical study

Bari, Ehsan; Mohebby, Behbood; Reza Naji, Hamid; Oladi, Reza; Yilgor, Nural; Nazarnezhad, Nouredin; M. Ohno, Katie; D. Nicholas, Darrel. Maderas-Cienc Tecnol; Vol. 20 No. 1 (2018); 35-56

Effect of pole size on preservative penetration and retention in air-dried ugandan grown eucalypt utility poles

Mugabi, Paul; Thembo, James. Maderas-Cienc Tecnol; Vol. 20 No. 1 (2018); 85-90

Effect of nanoclay-treated uf resin on the physical and mechanical properties of plywood manufactured with wood from tropical fast growth plantations

Muñoz, Freddy; Moya, Roger. Maderas-Cienc Tecnol; Vol. 20 No. 1 (2018); 11-24

Examining the efficiency of mechanic/enzymatic pretreatments in micro/nanofibrillated cellulose production

Tozluoğlu, Ayhan; Poyraz, Bayram; Candan, Zeki. Maderas-Cienc Tecnol; Vol. 20 No. 1 (2018); 67-84

Surface roughness of thin wood veneers sliced from laminated green wood lumber

Li, Guangyao; Wu, Qinglin; He, Yanli; Liu, Zhikun. Maderas-Cienc Tecnol; Vol. 20 No. 1 (2018); 3-10

Colour changes and morphological performance of impregnated jabon wood using polymerised merbau extractives

Malik, Jamaludin; Ozarska, Barbara; Santoso, Adi. Maderas-Cienc Tecnol; Vol. 20 No. 1 (2018); 91-102

Strength grading of turkish black pine structural timber by visual evaluation and nondestructive testing

Volkan Görgün, Hızır; Dündar, Türker. Maderas-Cienc Tecnol; Vol. 20 No. 1 (2018); 57-66

Impact of feed rate, milling depth and tool rake angle in peripheral milling of oak wood on the cutting force

Đurković, Marija; Mladenović, Goran; Tanović, Ljubodrag; Danon, Gradimir. Maderas-Cienc Tecnol; Vol. 20 No. 1 (2018); 25-34

The effect of titanium dioxide nanoparticles obtained by microwave-assisted hydrothermal method on the color and decay resistance of pinewood

Zanatta, Paula; Lazarotto, Marília; Gonzalez de Cademartori, Pedro Henrique; da Silva Cava, Sérgio; Lúcio Moreira, Mário; Alberto Gatto, Darci. Maderas-Cienc Tecnol; Vol. 19 No. 4 (2017); 495-506

Decay resistance of wood impregnated with monoethanolamine and sodium bisulfite pulping black liquors

Reza Nayeri, Hamid; Tarmian, Asghar; Abdulkhani, Ali; Ebrahimi, Ghanbar. Maderas-Cienc Tecnol; Vol. 19 No. 4 (2017); 507-516

Micro-mechanical properties of oak wood and comparison with standard-sized samples

Büyüksarı, Ümit; As, Nusret; Dündar, Türker; Korkmaz, Ogün. Maderas-Cienc Tecnol; Vol. 19 No. 4 (2017); 481-494

Maderas: Ciencia y Tecnología: Recent submissions

Discrimination of wood and charcoal from six caatinga species by near-infrared spectroscopy ﻿

Influence of combined hygro-thermo-mechanical treatment on technical characteristics of poplar wood ﻿

Liquefaction behaviour of twelve tropical hardwood species in phenol ﻿

Kraft scrap paper pulp as a substitute of wood chips in manufacture of particleboards resinated with hybrid pf/pmdi resin ﻿

Comparison of two kiln-drying schedules for turkish hazel (Corylus colurna) lumber of 5-cm thickness ﻿

Particularities of hollow-core briquettes obtained out of spruce and oak wooden waste ﻿

Efecto de la presión de prensado y la adición de lignina kraft en la producción de tableros aglomerados autoenlazados a partir de Gynerium sagittatum pretratada con vapor ﻿

Evaluation of plastic composites made with Laccosperma secundiflorum and Eremospatha macrocarpa canes ﻿

Acknowledgements for reviewers 2016-2017 ﻿

Monitoring the cell wall characteristics of degraded beech wood by white-rot fungi: Anatomical, chemical, and photochemical study ﻿

Effect of pole size on preservative penetration and retention in air-dried ugandan grown eucalypt utility poles ﻿

Effect of nanoclay-treated uf resin on the physical and mechanical properties of plywood manufactured with wood from tropical fast growth plantations ﻿

Examining the efficiency of mechanic/enzymatic pretreatments in micro/nanofibrillated cellulose production ﻿

Surface roughness of thin wood veneers sliced from laminated green wood lumber ﻿

Colour changes and morphological performance of impregnated jabon wood using polymerised merbau extractives ﻿

Strength grading of turkish black pine structural timber by visual evaluation and nondestructive testing ﻿

Impact of feed rate, milling depth and tool rake angle in peripheral milling of oak wood on the cutting force ﻿

The effect of titanium dioxide nanoparticles obtained by microwave-assisted hydrothermal method on the color and decay resistance of pinewood ﻿

Decay resistance of wood impregnated with monoethanolamine and sodium bisulfite pulping black liquors ﻿

Micro-mechanical properties of oak wood and comparison with standard-sized samples ﻿