Recently added

Plywoods of northeast argentinian woods and soybean protein-based adhesives: Relationship between morphological aspects of veneers and shear strength values

Nicolao, E. S.; Monteoliva, S.; Ciannamea, E.M.; Stefani, P.. Maderas-Cienc Tecnol; Vol. 24 (2022); 1-14

Comparison of some wood properties of juvenile black pines of different origin planted in the same habitat

Burak Arslan, Mustafa; AvcI, Erkan; Tozluoğlu, Ayhan; Birtürk, Turgay; Saraçbaşi, Akın; Örtel, Erdal. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-12

A novel method for producing a glulam from the wood of peeler cores

Koynov, Daniel; Grigorov, Rosen; Valyova, Miglena. Maderas-Cienc Tecnol; Vol. 24 (2022); 1-8

Mass transfer properties of Acacia mangium plantation wood

Tien Manh, Ha; L. Redman, Adam; Pham Van, Chuong; Duy Ngoc, Bui. Maderas-Cienc Tecnol; Vol. 24 (2022); 1-12

Influences of different drying climates on Eucalyptus camaldulensis wood properties

Kılıç Ak, Ayşenur; Bektaş, İbrahim; Çiçekler, Mustafa; Tutuş, Ahmet. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-12

Comparative performance of pxts versus creosote in an awpa e7 field stake test

D. Nicholas, Darrel; Rowlen, Amy; Milsted, David. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-6

Glulam connections assembled with screws in different installation angles

Hanna, David; Tannert, Thomas. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-14

Using of versine and sagitta calculations for log sawing optimization, part 1: Circular cross-section

Volkan Gorgun, Hizir. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-8

Determination of the strength performance of table frames

Džinčić, Igor; Palija, Tanja; Živanić, Dragan; Dacić, Vojislav. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-10

Biochemical features of organic extractives from Eucalyptus and Corymbia woods using ethanol as a solvent

Techera Barbosa, Kelvin; Pereira Acosta, Andrey; Romer Schulz, Henrique; Santi, Ivandra; de Avila Delucis, Rafael; Beltrame, Rafael; Alberto Gatto, Darci. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-8

Decay capabilities of basidiomycetes colonizing air-seasoning red oak and blackgum railroad ties

Rogers, Leon; Cappellazzi, Jed; J. Morrell, Jeffrey. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-8

Compressive strength parallel to grain of earlywood and latewood of yellow pine

Mańkowski, Piotr; Laskowska, Agnieszka. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-12

Effects of hot-cold oil treatment on biological resistance and physical properties of brutia pine sapwood

Ali Var, Ahmet; Yalçin, Mesut; Ümit Yalçin, Ömer; Demir, Mehmet. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-12

Comparative analysis of the physical and mechanical properties of kraft paper and watercolor paper

Li, Anling; Shi, Yameng; Zhang, Jiaqi; Zhang, Yong. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-12

Relationship between vessel parameters and cleavage associated with checking in eucalyptus grandis wood

Charles Dias Soares, Bruno; Tarcísio Lima, José; Reinaldo Moreira da Silva, José. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-8

Bending moment resistance of t-type joints reinforced with basalt and glass woven fabric materials

Karaman, Abdurrahman. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-12

Theoretical model for further development of intumescent substances to remediate smoldering in wood fiber insulation panels

Guindos, Pablo; Auad, Gaspar; Kolb, Torsten. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-22

Preparation and performance of tannin–glyoxal–urea resin-bonded grinding wheel loaded with sio2 reinforcing particles

Zhang, Jun; Liu, Bowen; Zhou, Yunxia; Essawy, Hisham; Li, Jinxin; Chen, Qian; Zhou, Xiaojian; Du, Guanben. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-16

Kinetic analysis of thermal degradation of Cedrela odorata, Marmaroxylon racemosum and Tectona grandis from timber industry

Daiane Cavinato, Camily; Poletto, Matheus. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-10

Biologically synthesised copper oxide and zinc oxide nanoparticle formulation as an environmentally friendly wood protectant for the management of wood borer, Lyctus africanus

Shiny, K. S.; Sundararaj, R.. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-12

Maderas: Ciencia y Tecnología: Recent submissions

Plywoods of northeast argentinian woods and soybean protein-based adhesives: Relationship between morphological aspects of veneers and shear strength values ﻿

Comparison of some wood properties of juvenile black pines of different origin planted in the same habitat ﻿

A novel method for producing a glulam from the wood of peeler cores ﻿

Mass transfer properties of Acacia mangium plantation wood ﻿

Influences of different drying climates on Eucalyptus camaldulensis wood properties ﻿

Comparative performance of pxts versus creosote in an awpa e7 field stake test ﻿

Glulam connections assembled with screws in different installation angles ﻿

Using of versine and sagitta calculations for log sawing optimization, part 1: Circular cross-section ﻿

Determination of the strength performance of table frames ﻿

Biochemical features of organic extractives from Eucalyptus and Corymbia woods using ethanol as a solvent ﻿

Decay capabilities of basidiomycetes colonizing air-seasoning red oak and blackgum railroad ties ﻿

Compressive strength parallel to grain of earlywood and latewood of yellow pine ﻿

Effects of hot-cold oil treatment on biological resistance and physical properties of brutia pine sapwood ﻿

Comparative analysis of the physical and mechanical properties of kraft paper and watercolor paper ﻿

Relationship between vessel parameters and cleavage associated with checking in eucalyptus grandis wood ﻿

Bending moment resistance of t-type joints reinforced with basalt and glass woven fabric materials ﻿

Theoretical model for further development of intumescent substances to remediate smoldering in wood fiber insulation panels ﻿

Preparation and performance of tannin–glyoxal–urea resin-bonded grinding wheel loaded with sio2 reinforcing particles ﻿

Kinetic analysis of thermal degradation of Cedrela odorata, Marmaroxylon racemosum and Tectona grandis from timber industry ﻿

Biologically synthesised copper oxide and zinc oxide nanoparticle formulation as an environmentally friendly wood protectant for the management of wood borer, Lyctus africanus ﻿