Recently added

Effects of end-pressure on the finger-joint quality of black spruce lumber: a microscopic analysis

Bustos,Cecilia; Hernández,Roger E; Beauregard,Robert; Mohammad,Mohammad. Maderas. Ciencia y tecnología v.13 n.3 2011

Influence of uron resins on the performance of UF resins as adhesives for plywood

Gao,Wei; Li,Jianzhang. Maderas. Ciencia y tecnología v.14 n.1 2012

Fisiología de hongos filamentosos: efecto del Zn y Mn

Ibáñez,Claudia. Maderas. Ciencia y tecnología v.13 n.3 2011

The effect of aging on element plant availability and bacterial counts of mixtures of wood ash and sewage sludge

Pousada-Ferradás,Yudani; Seoane-Labandeira,Socorro; Blanco,Miguel; Núñez-Delgado,Avelino. Maderas. Ciencia y tecnología v.13 n.3 2011

Weathering performance of particleboards manufactured from blends of forest residues with Red pine (Pinus brutia) wood

Turgut Sahin,H; Burak Arslan,M. Maderas. Ciencia y tecnología v.13 n.3 2011

A correlation between the gas and liquid permeabilities of beech wood heat-treated in hot water and steam mediums

Taghiyari,Hamid Reza; Talaei,Aisona; Karimi,Ali. Maderas. Ciencia y tecnología v.13 n.3 2011

Runoff characteristics in forest plots before and after wood ash fertilization

Núñez-Delgado,Avelino; Quiroga-Lago,Francisco; Soto-González,Benedicto. Maderas. Ciencia y tecnología v.13 n.3 2011

Timber management practices and timber species used by small scale furniture workshops in Uganda

Sseremba,O. E; Kaboggoza,J. R. S; Ziraba,N. Y; Mugabi,P; Banana,A. Y; Zziwa,A; Kambugu,R. K; Kizito,S; Syofuna,A; Ndawula,J. Maderas. Ciencia y tecnología v.13 n.3 2011

Estudio del mojado y caracterización superficial por microscopía de barrido laser confocal de chapas de madera obtenidas por desenrollo

Vázquez,Gonzalo; Galiñanes,Cristina; Freire,M. Sonia; Antorrena,G; González-Alvarez,Julia. Maderas. Ciencia y tecnología v.13 n.2 2011

Developments in undergraduate wood science education at Stellenbosch University, South Africa

Rypstra,Tim. Maderas. Ciencia y tecnología v.13 n.1 2011

Effect and mechanism of nanosize copper oxide on some physical and mechanical properties of flakeboards

Gao,Wei; Cao,Jinzhen; Kamdem,D. Pascal. Maderas. Ciencia y tecnología v.13 n.2 2011

Variación radial y longitudinal de la densidad básica en árboles de Eucalyptus regnans de 16 años

Omonte,Margarette; Valenzuela,Luis. Maderas. Ciencia y tecnología v.13 n.2 2011

Fijación química del preservante CCA-C en la madera de Pinus elliottii Parte 1: Influencia de la temperatura y de la humedad relativa

Wottitz,Carlos A; Moreno,Graciela A. Maderas. Ciencia y tecnología v.13 n.1 2011

Maderas: Ciencia y Tecnología: Recent submissions

Effects of end-pressure on the finger-joint quality of black spruce lumber: a microscopic analysis

Influence of uron resins on the performance of UF resins as adhesives for plywood

Fisiología de hongos filamentosos: efecto del Zn y Mn

The effect of aging on element plant availability and bacterial counts of mixtures of wood ash and sewage sludge

Weathering performance of particleboards manufactured from blends of forest residues with Red pine (Pinus brutia) wood

A correlation between the gas and liquid permeabilities of beech wood heat-treated in hot water and steam mediums

Runoff characteristics in forest plots before and after wood ash fertilization

Timber management practices and timber species used by small scale furniture workshops in Uganda

Estudio del mojado y caracterización superficial por microscopía de barrido laser confocal de chapas de madera obtenidas por desenrollo

Developments in undergraduate wood science education at Stellenbosch University, South Africa

Effect and mechanism of nanosize copper oxide on some physical and mechanical properties of flakeboards

Variación radial y longitudinal de la densidad básica en árboles de Eucalyptus regnans de 16 años

Fijación química del preservante CCA-C en la madera de Pinus elliottii Parte 1: Influencia de la temperatura y de la humedad relativa

Evaluating vibrations on a small-scale model of a timber footbridge

Effectiveness of selected preservatives in protecting Ugandan grown Eucalyptus grandis wood against termite attack

Fibre level modelling of free water behaviour during wood drying and wetting

Mass transfer in medium density fiberboard (MDF) modified by Na+ montmorillonite (Na+MMT) nanoclay

Chemical modification of cellulose by acylation: Application to adsorption of methylene blue

Influences of the operating variables of acetosolv pulping on pulp properties of oil palm frond fibres

Inclusion of the sorption hysteresis phenomenon in future drying models: Some basic considerations

Maderas: Ciencia y Tecnología: Recent submissions

Effects of end-pressure on the finger-joint quality of black spruce lumber: a microscopic analysis ﻿

Influence of uron resins on the performance of UF resins as adhesives for plywood ﻿

Fisiología de hongos filamentosos: efecto del Zn y Mn ﻿

The effect of aging on element plant availability and bacterial counts of mixtures of wood ash and sewage sludge ﻿

Weathering performance of particleboards manufactured from blends of forest residues with Red pine (Pinus brutia) wood ﻿

A correlation between the gas and liquid permeabilities of beech wood heat-treated in hot water and steam mediums ﻿

Runoff characteristics in forest plots before and after wood ash fertilization ﻿

Timber management practices and timber species used by small scale furniture workshops in Uganda ﻿

Estudio del mojado y caracterización superficial por microscopía de barrido laser confocal de chapas de madera obtenidas por desenrollo ﻿

Developments in undergraduate wood science education at Stellenbosch University, South Africa ﻿

Effect and mechanism of nanosize copper oxide on some physical and mechanical properties of flakeboards ﻿

Variación radial y longitudinal de la densidad básica en árboles de Eucalyptus regnans de 16 años ﻿

Fijación química del preservante CCA-C en la madera de Pinus elliottii Parte 1: Influencia de la temperatura y de la humedad relativa ﻿

Evaluating vibrations on a small-scale model of a timber footbridge ﻿

Effectiveness of selected preservatives in protecting Ugandan grown Eucalyptus grandis wood against termite attack ﻿

Fibre level modelling of free water behaviour during wood drying and wetting ﻿

Mass transfer in medium density fiberboard (MDF) modified by Na+ montmorillonite (Na+MMT) nanoclay ﻿

Chemical modification of cellulose by acylation: Application to adsorption of methylene blue ﻿

Influences of the operating variables of acetosolv pulping on pulp properties of oil palm frond fibres ﻿

Inclusion of the sorption hysteresis phenomenon in future drying models: Some basic considerations ﻿

Effects of end-pressure on the finger-joint quality of black spruce lumber: a microscopic analysis

Influence of uron resins on the performance of UF resins as adhesives for plywood

Fisiología de hongos filamentosos: efecto del Zn y Mn

The effect of aging on element plant availability and bacterial counts of mixtures of wood ash and sewage sludge

Weathering performance of particleboards manufactured from blends of forest residues with Red pine (Pinus brutia) wood

A correlation between the gas and liquid permeabilities of beech wood heat-treated in hot water and steam mediums

Runoff characteristics in forest plots before and after wood ash fertilization

Timber management practices and timber species used by small scale furniture workshops in Uganda

Estudio del mojado y caracterización superficial por microscopía de barrido laser confocal de chapas de madera obtenidas por desenrollo

Developments in undergraduate wood science education at Stellenbosch University, South Africa

Effect and mechanism of nanosize copper oxide on some physical and mechanical properties of flakeboards

Variación radial y longitudinal de la densidad básica en árboles de Eucalyptus regnans de 16 años

Fijación química del preservante CCA-C en la madera de Pinus elliottii Parte 1: Influencia de la temperatura y de la humedad relativa

Evaluating vibrations on a small-scale model of a timber footbridge

Effectiveness of selected preservatives in protecting Ugandan grown Eucalyptus grandis wood against termite attack

Fibre level modelling of free water behaviour during wood drying and wetting

Mass transfer in medium density fiberboard (MDF) modified by Na+ montmorillonite (Na+MMT) nanoclay

Chemical modification of cellulose by acylation: Application to adsorption of methylene blue

Influences of the operating variables of acetosolv pulping on pulp properties of oil palm frond fibres

Inclusion of the sorption hysteresis phenomenon in future drying models: Some basic considerations