Show simple item record

dc.creatorGanem-Karlen, Carolina
dc.date2018-12-31
dc.identifierhttps://revistas.ubiobio.cl/index.php/RHS/article/view/3363
dc.identifier10.22320/07190700.2018.08.02.06
dc.descriptionThe aim of the paper is to assess the usefulness of infrared thermography for a quick diagnostic of the thermal performance of the existing building stock. A representative housing case study in the city of Mendoza (32o40’SL, 68o51’WL, 750m above sea level) was selected and infrared imaging was carried out with a low cost thermograph camera (FLIR i3) at two times every day, in the late evening (8 pm) and in the early morning (7 am), for avoiding possible mistakes due to incident direct solar radiation. Emissivity was introduced in the camera according with local material studies. At the same time continuous measurement of air temperature inside and outside were taken with data-loggers with the objective of examining in detail the obtained results by the thermographic survey. Because the case studied has a high thermal inertia the survey in the evening shows better the different behaviour of construction materials. It is concluded that the thermogaphic survey resulted a valuable tool for quick thermal diagnostic in building certification if a specific protocol is followed in order to obtain accurate results.en-US
dc.descriptionEl objetivo de este trabajo es valorar la utilidad de la termografía infrarroja para diagnosticar en forma rápida el desempeño térmico de edificios existentes. Se seleccionó, para ello, un caso de estudio representativo de vivienda en la ciudad de Mendoza (32o40’LS, 68o51’LO, 750msnm) y se procedió a la toma de imágenes termográficas con una cámara de bajo costo (FLIR i3), en dos momentos del día: en la tarde-noche (8 pm) y en la mañana, temprano, (7am), de modo de evitar posibles errores debidos a la incidencia de radiación solar directa. La emisividad se introdujo en la cámara de acuerdo con estudios de materiales locales. Al mismo tiempo, se realizaron mediciones continuas de temperatura del aire dentro y fuera de la vivienda con micro-adquisidores, con el objeto de contrastar los resultados obtenidos mediante la exploración termográfica. Dado que el caso de estudio tiene una inercia térmica alta, las imágenes tomadas durante la tarde-noche muestran en una mayor medida los distintos comportamientos de los materiales de construcción. Se concluye que la termografía infrarroja resulta una herramienta valiosa para un diagnóstico térmico rápido en la certificación edilicia, si se sigue un protocolo específico que permita obtener resultados confiables.es-ES
dc.formatapplication/pdf
dc.languagespa
dc.publisherUniversidad del Bío-Bío, Chilees-ES
dc.relationhttps://revistas.ubiobio.cl/index.php/RHS/article/view/3363/3509
dc.rightsDerechos de autor 2018 Carolina Ganem Karlenes-ES
dc.sourceHábitat Sustentable; V.8, N.2 (2018): Diciembre 2018; 80-89es-ES
dc.sourceSustainable Habitat; V.8, N.2 (2018): December 2018; 80-89en-US
dc.sourceHábitat Sustentable; V.8, N.2 (2018): Dezembro de 2018; 80-89pt-PT
dc.source0719-0700
dc.subjectdiagnosisen-US
dc.subjecttemperatureen-US
dc.subjectsemi-detached housesen-US
dc.subjectdiagnósticoes-ES
dc.subjecttemperaturaes-ES
dc.subjectviviendas apareadases-ES
dc.titleTermografía infrarroja para el diagnóstico térmico confiable con alta replicabilidad y bajo costo de viviendas en Mendoza, Argentinaes-ES
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/publishedVersion
dc.typeArtículo revisado por pareses-ES


This item appears in the following Collection(s)

Show simple item record