Recently added

Predicción del contenido de humedad de equilibrio de la madera en función del peso específico de la pared celular y variables ambientales

Pérez-Peña,Natalia; Valenzuel,Luis; Diaz-vaz,Juan Eduardo; Ananías,Rubén A. Maderas. Ciencia y tecnología v.13 n.3 2011

Searching for material symmetries in the burr wood of thuja by a direct contact ultrasonic method on spherical samples

El Mouridi,Mohammed; Laurent,Thierry; Brancheriau,Loïc; Arnould,Olivier; Famiri,Abderrahim; Hakam,Abdelillah; Gril,Joseph. Maderas. Ciencia y tecnología v.13 n.3 2011

Efecto de la carga de sulfito de sodio en el pulpaje NSSC de E. globulus

Pereira,Miguel Angel; Rudolf,Patt; Kordsachia,Othar. Maderas. Ciencia y tecnología v.13 n.2 2011

Comparison of phenolic extracts obtained of Pinus radiata bark from pulp and paper industry and sawmill industry

Aspé,Estrella; Fernández,Katherina. Maderas. Ciencia y tecnología v.13 n.3 2011

Lignocellulosic composites from Brazilian giant bamboo (Guadua magna): Part 2: Properties of cement and gypsum bonded particleboards

de Araújo,Priscila C; Arruda,Larissa M; Del Menezzi,Cláudio H. S; Teixeira,Divino E; de Souza,Mário R. Maderas. Ciencia y tecnología v.13 n.3 2011

Effects of end-pressure on the finger-joint quality of black spruce lumber: a microscopic analysis

Bustos,Cecilia; Hernández,Roger E; Beauregard,Robert; Mohammad,Mohammad. Maderas. Ciencia y tecnología v.13 n.3 2011

Influence of uron resins on the performance of UF resins as adhesives for plywood

Gao,Wei; Li,Jianzhang. Maderas. Ciencia y tecnología v.14 n.1 2012

Fisiología de hongos filamentosos: efecto del Zn y Mn

Ibáñez,Claudia. Maderas. Ciencia y tecnología v.13 n.3 2011

The effect of aging on element plant availability and bacterial counts of mixtures of wood ash and sewage sludge

Pousada-Ferradás,Yudani; Seoane-Labandeira,Socorro; Blanco,Miguel; Núñez-Delgado,Avelino. Maderas. Ciencia y tecnología v.13 n.3 2011

Weathering performance of particleboards manufactured from blends of forest residues with Red pine (Pinus brutia) wood

Turgut Sahin,H; Burak Arslan,M. Maderas. Ciencia y tecnología v.13 n.3 2011

A correlation between the gas and liquid permeabilities of beech wood heat-treated in hot water and steam mediums

Taghiyari,Hamid Reza; Talaei,Aisona; Karimi,Ali. Maderas. Ciencia y tecnología v.13 n.3 2011

Runoff characteristics in forest plots before and after wood ash fertilization

Núñez-Delgado,Avelino; Quiroga-Lago,Francisco; Soto-González,Benedicto. Maderas. Ciencia y tecnología v.13 n.3 2011

Timber management practices and timber species used by small scale furniture workshops in Uganda

Sseremba,O. E; Kaboggoza,J. R. S; Ziraba,N. Y; Mugabi,P; Banana,A. Y; Zziwa,A; Kambugu,R. K; Kizito,S; Syofuna,A; Ndawula,J. Maderas. Ciencia y tecnología v.13 n.3 2011

Estudio del mojado y caracterización superficial por microscopía de barrido laser confocal de chapas de madera obtenidas por desenrollo

Vázquez,Gonzalo; Galiñanes,Cristina; Freire,M. Sonia; Antorrena,G; González-Alvarez,Julia. Maderas. Ciencia y tecnología v.13 n.2 2011

Fijación química del preservante CCA-C en la madera de Pinus elliottii Parte 1: Influencia de la temperatura y de la humedad relativa

Wottitz,Carlos A; Moreno,Graciela A. Maderas. Ciencia y tecnología v.13 n.1 2011

Evaluating vibrations on a small-scale model of a timber footbridge

de Alcântara Segundinho,Pedro Gutemberg; Alves Dias,Antonio; Carreira,Marcelo Rodrigo. Maderas. Ciencia y tecnología v.13 n.2 2011

Effectiveness of selected preservatives in protecting Ugandan grown Eucalyptus grandis wood against termite attack

Ssemaganda,I. E; Mugabi,P; Tumwebaze,S. B. Maderas. Ciencia y tecnología v.13 n.2 2011

Universidad del Bío-Bío: Recent submissions

Predicción del contenido de humedad de equilibrio de la madera en función del peso específico de la pared celular y variables ambientales

Searching for material symmetries in the burr wood of thuja by a direct contact ultrasonic method on spherical samples

Efecto de la carga de sulfito de sodio en el pulpaje NSSC de E. globulus

Comparison of phenolic extracts obtained of Pinus radiata bark from pulp and paper industry and sawmill industry

Lignocellulosic composites from Brazilian giant bamboo (Guadua magna): Part 2: Properties of cement and gypsum bonded particleboards

Effects of end-pressure on the finger-joint quality of black spruce lumber: a microscopic analysis

Influence of uron resins on the performance of UF resins as adhesives for plywood

Fisiología de hongos filamentosos: efecto del Zn y Mn

The effect of aging on element plant availability and bacterial counts of mixtures of wood ash and sewage sludge

Weathering performance of particleboards manufactured from blends of forest residues with Red pine (Pinus brutia) wood

A correlation between the gas and liquid permeabilities of beech wood heat-treated in hot water and steam mediums

Runoff characteristics in forest plots before and after wood ash fertilization

Timber management practices and timber species used by small scale furniture workshops in Uganda

Estudio del mojado y caracterización superficial por microscopía de barrido laser confocal de chapas de madera obtenidas por desenrollo

Developments in undergraduate wood science education at Stellenbosch University, South Africa

Effect and mechanism of nanosize copper oxide on some physical and mechanical properties of flakeboards

Variación radial y longitudinal de la densidad básica en árboles de Eucalyptus regnans de 16 años

Fijación química del preservante CCA-C en la madera de Pinus elliottii Parte 1: Influencia de la temperatura y de la humedad relativa

Evaluating vibrations on a small-scale model of a timber footbridge

Effectiveness of selected preservatives in protecting Ugandan grown Eucalyptus grandis wood against termite attack

Universidad del Bío-Bío: Recent submissions

Predicción del contenido de humedad de equilibrio de la madera en función del peso específico de la pared celular y variables ambientales ﻿

Searching for material symmetries in the burr wood of thuja by a direct contact ultrasonic method on spherical samples ﻿

Efecto de la carga de sulfito de sodio en el pulpaje NSSC de E. globulus ﻿

Comparison of phenolic extracts obtained of Pinus radiata bark from pulp and paper industry and sawmill industry ﻿

Lignocellulosic composites from Brazilian giant bamboo (Guadua magna): Part 2: Properties of cement and gypsum bonded particleboards ﻿

Effects of end-pressure on the finger-joint quality of black spruce lumber: a microscopic analysis ﻿

Influence of uron resins on the performance of UF resins as adhesives for plywood ﻿

Fisiología de hongos filamentosos: efecto del Zn y Mn ﻿

The effect of aging on element plant availability and bacterial counts of mixtures of wood ash and sewage sludge ﻿

Weathering performance of particleboards manufactured from blends of forest residues with Red pine (Pinus brutia) wood ﻿

A correlation between the gas and liquid permeabilities of beech wood heat-treated in hot water and steam mediums ﻿

Runoff characteristics in forest plots before and after wood ash fertilization ﻿

Timber management practices and timber species used by small scale furniture workshops in Uganda ﻿

Estudio del mojado y caracterización superficial por microscopía de barrido laser confocal de chapas de madera obtenidas por desenrollo ﻿

Developments in undergraduate wood science education at Stellenbosch University, South Africa ﻿

Effect and mechanism of nanosize copper oxide on some physical and mechanical properties of flakeboards ﻿

Variación radial y longitudinal de la densidad básica en árboles de Eucalyptus regnans de 16 años ﻿

Fijación química del preservante CCA-C en la madera de Pinus elliottii Parte 1: Influencia de la temperatura y de la humedad relativa ﻿

Evaluating vibrations on a small-scale model of a timber footbridge ﻿

Effectiveness of selected preservatives in protecting Ugandan grown Eucalyptus grandis wood against termite attack ﻿

Predicción del contenido de humedad de equilibrio de la madera en función del peso específico de la pared celular y variables ambientales

Searching for material symmetries in the burr wood of thuja by a direct contact ultrasonic method on spherical samples

Efecto de la carga de sulfito de sodio en el pulpaje NSSC de E. globulus

Comparison of phenolic extracts obtained of Pinus radiata bark from pulp and paper industry and sawmill industry

Lignocellulosic composites from Brazilian giant bamboo (Guadua magna): Part 2: Properties of cement and gypsum bonded particleboards

Effects of end-pressure on the finger-joint quality of black spruce lumber: a microscopic analysis

Influence of uron resins on the performance of UF resins as adhesives for plywood

Fisiología de hongos filamentosos: efecto del Zn y Mn

The effect of aging on element plant availability and bacterial counts of mixtures of wood ash and sewage sludge

Weathering performance of particleboards manufactured from blends of forest residues with Red pine (Pinus brutia) wood

A correlation between the gas and liquid permeabilities of beech wood heat-treated in hot water and steam mediums

Runoff characteristics in forest plots before and after wood ash fertilization

Timber management practices and timber species used by small scale furniture workshops in Uganda

Estudio del mojado y caracterización superficial por microscopía de barrido laser confocal de chapas de madera obtenidas por desenrollo

Developments in undergraduate wood science education at Stellenbosch University, South Africa

Effect and mechanism of nanosize copper oxide on some physical and mechanical properties of flakeboards

Variación radial y longitudinal de la densidad básica en árboles de Eucalyptus regnans de 16 años

Fijación química del preservante CCA-C en la madera de Pinus elliottii Parte 1: Influencia de la temperatura y de la humedad relativa

Evaluating vibrations on a small-scale model of a timber footbridge

Effectiveness of selected preservatives in protecting Ugandan grown Eucalyptus grandis wood against termite attack