Recently added

Propiedades mecánicas de elementos laminados clavados

Tannert, Thomas; Poblete, Cecilia; Gotelli, Genaro. Maderas-Cienc Tecnol; Vol. 5 No. 1 (2003); 51-67

Influencia de la madera juvenil de pino radiata sobre las propiedades mecánicas de tableros osb

Pecho, Robert; A. Ananias, Rubén; Ballerini, Aldo; Cloutier, Alain. Maderas-Cienc Tecnol; Vol. 6 No. 1 (2004); 45-59

Influencia de la estructura anatómica en la permeabilidad especifica transversal al gas del Pino radiata

Salvo, Linette; Ananías, Rubén; Cloutier, Alain. Maderas-Cienc Tecnol; Vol. 6 No. 1 (2004); 33-44

Resistencia al envejecimiento de uniones clavadas de tableros de hojuelas orientadas (OSB)

Lomagno, Jorge; Gotelli, Genaro. Maderas-Cienc Tecnol; Vol. 5 No. 1 (2003); 44-50

Resistencia mecánica de los tableros de densidad media Parte 2: Modelo polinomial ortogonal para estimar la resistencia a la fatiga en la tracción

Martínez-Espinosa, Mariano; Calil Jr., Carlito. Maderas-Cienc Tecnol; Vol. 6 No. 1 (2004); 61-71

Caracterizacción del mdf producido a partir de Eucalipto y adhesivo poliuretano natural

de Campos, Cristiane Inácio; Rocco Lahr, Francisco Antonio. Maderas-Cienc Tecnol; Vol. 6 No. 1 (2004); 73-84

Modelo elástico ortotrópico aplicado a la madera

Tadeu Mascia, Nilson. Maderas-Cienc Tecnol; Vol. 5 No. 1 (2003); 3-19

Fluidization behavior of wood/sand mixtures

Ramakers, Bram J.; de Ridder, Ronny; J.A.M. Kerkhof, Piet. Maderas-Cienc Tecnol; Vol. 6 No. 2 (2004); 145-153

Application of neutron radiography to investigate changes in permeability in bacteria treated pinus radiata timber

Nijdam, J.J; E., Lehmann; R.B., Keey. Maderas-Cienc Tecnol; Vol. 6 No. 1 (2004); 19-31

Simulación del secado convencional de la madera wood drying simulation

Salinas, Carlos; Ananias, Rubén A.; Alvear, Mara. Maderas-Cienc Tecnol; Vol. 6 No. 1 (2004); 3-18

Identification of wood destruction during drying

J. Kowalski, Stefan; Smoczkiewicz, Anna. Maderas-Cienc Tecnol; Vol. 6 No. 2 (2004); 133-142

The effect of drying and storage conditions on case hardening of scots pine and norway spruce timber

Tarvainen, V.; Ranta-Maunus, A.; Hanhijärvi, A.; Forsén, H.. Maderas-Cienc Tecnol; Vol. 8 No. 1 (2006); 3-14

Within-tree variability in the drying properties for blackbutt timber in new south wales

Cabardo, S. J.; Langrish, T. A. G.. Maderas-Cienc Tecnol; Vol. 8 No. 1 (2006); 15-24

Use of a modified drying medium to prevent discolouration of radiata pine sapwood during kiln drying

Pang, S.; Li, J.. Maderas-Cienc Tecnol; Vol. 8 No. 1 (2006); 41-48

Development of elastic strain and mechano-sorptive strain during conditioning of Eucalyptus camaldulensis lumber in batch kiln

Chen, Taian; Gu, Lianbai. Maderas-Cienc Tecnol; Vol. 8 No. 1 (2006); 49-56

Universidad del Bío-Bío: Recent submissions

Propiedades mecánicas de elementos laminados clavados

Influencia de la madera juvenil de pino radiata sobre las propiedades mecánicas de tableros osb

Influencia de la estructura anatómica en la permeabilidad especifica transversal al gas del Pino radiata

Resistencia al envejecimiento de uniones clavadas de tableros de hojuelas orientadas (OSB)

Resistencia mecánica de los tableros de densidad media Parte 2: Modelo polinomial ortogonal para estimar la resistencia a la fatiga en la tracción

Caracterizacción del mdf producido a partir de Eucalipto y adhesivo poliuretano natural

Modelo elástico ortotrópico aplicado a la madera

Fluidization behavior of wood/sand mixtures

Application of neutron radiography to investigate changes in permeability in bacteria treated pinus radiata timber

Simulación del secado convencional de la madera wood drying simulation

Identification of wood destruction during drying

The effect of drying and storage conditions on case hardening of scots pine and norway spruce timber

Within-tree variability in the drying properties for blackbutt timber in new south wales

Use of a modified drying medium to prevent discolouration of radiata pine sapwood during kiln drying

Development of elastic strain and mechano-sorptive strain during conditioning of Eucalyptus camaldulensis lumber in batch kiln

Surface colour change in wood during drying above and below fibre saturation point

Conference report: opportunity and challenge in wood drying: Quality control and energy saving

Wood fracture pattern during the water desorption process

Veneer block conditioning manual for veneer and plywood production

Corrigendum

Universidad del Bío-Bío: Recent submissions

Propiedades mecánicas de elementos laminados clavados ﻿

Influencia de la madera juvenil de pino radiata sobre las propiedades mecánicas de tableros osb ﻿

Influencia de la estructura anatómica en la permeabilidad especifica transversal al gas del Pino radiata ﻿

Resistencia al envejecimiento de uniones clavadas de tableros de hojuelas orientadas (OSB) ﻿

Resistencia mecánica de los tableros de densidad media Parte 2: Modelo polinomial ortogonal para estimar la resistencia a la fatiga en la tracción ﻿

Caracterizacción del mdf producido a partir de Eucalipto y adhesivo poliuretano natural ﻿

Modelo elástico ortotrópico aplicado a la madera ﻿

Fluidization behavior of wood/sand mixtures ﻿

Application of neutron radiography to investigate changes in permeability in bacteria treated pinus radiata timber ﻿

Simulación del secado convencional de la madera wood drying simulation ﻿

Identification of wood destruction during drying ﻿

The effect of drying and storage conditions on case hardening of scots pine and norway spruce timber ﻿

Within-tree variability in the drying properties for blackbutt timber in new south wales ﻿

Use of a modified drying medium to prevent discolouration of radiata pine sapwood during kiln drying ﻿

Development of elastic strain and mechano-sorptive strain during conditioning of Eucalyptus camaldulensis lumber in batch kiln ﻿

Surface colour change in wood during drying above and below fibre saturation point ﻿

Conference report: opportunity and challenge in wood drying: Quality control and energy saving ﻿

Wood fracture pattern during the water desorption process ﻿

Veneer block conditioning manual for veneer and plywood production ﻿

Corrigendum ﻿

Propiedades mecánicas de elementos laminados clavados

Influencia de la madera juvenil de pino radiata sobre las propiedades mecánicas de tableros osb

Influencia de la estructura anatómica en la permeabilidad especifica transversal al gas del Pino radiata

Resistencia al envejecimiento de uniones clavadas de tableros de hojuelas orientadas (OSB)

Resistencia mecánica de los tableros de densidad media Parte 2: Modelo polinomial ortogonal para estimar la resistencia a la fatiga en la tracción

Caracterizacción del mdf producido a partir de Eucalipto y adhesivo poliuretano natural

Modelo elástico ortotrópico aplicado a la madera

Fluidization behavior of wood/sand mixtures

Application of neutron radiography to investigate changes in permeability in bacteria treated pinus radiata timber

Simulación del secado convencional de la madera wood drying simulation

Identification of wood destruction during drying

The effect of drying and storage conditions on case hardening of scots pine and norway spruce timber

Within-tree variability in the drying properties for blackbutt timber in new south wales

Use of a modified drying medium to prevent discolouration of radiata pine sapwood during kiln drying

Development of elastic strain and mechano-sorptive strain during conditioning of Eucalyptus camaldulensis lumber in batch kiln

Surface colour change in wood during drying above and below fibre saturation point

Conference report: opportunity and challenge in wood drying: Quality control and energy saving

Wood fracture pattern during the water desorption process

Veneer block conditioning manual for veneer and plywood production

Corrigendum