Recently added

Laboratory experiments on hygrothermal behaviour of real-scale timber walls

Rafi diarison, Helisoa; Mougel, Eric; Nicolas, Alexis. Maderas-Cienc Tecnol; Vol. 14 No. 3 (2012); 389-402

Aplicación de celulosa nanofibrilada, en masa y superficie, a la pulpa mecánica de muela de piedra: Una sólida alternativa al tratamiento clásico de refinado

Delgado-Aguilar, Marc; Recas, Elena; Puig, Josep; Arbat, Gerard; Pereira, Miguel; Vilaseca, Fabiola; Mutjé, Pere. Maderas-Cienc Tecnol; Vol. 17 No. 2 (2015); 293-304

Characterization of the rhizophora particleboard as a tissue-equivalent phantom material bonded with bio–based adhesive

Taghizadeh Tousi, Ehsan; Hashim, Rokiah; Bauk, Sabar; Suhaimi Jaafar, Mohamad; Mohammad Hamdan Abuarra, Ali; Mahmoud Al-Jarrah, Amer; Ababneh, Baker; Taghizadeh Tousi, Afsaneh; Saleh Ali Aldroobi, Khalid. Maderas-Cienc Tecnol; Vol. 17 No. 2 (2015); 305-318

Application of aqueous two phase systems based on polyethylene glycol and sodium citrate for the recovery of phenolic compounds from eucalyptus wood

Xavier, Lucía; Freire, María Sonia; Vidal-Tato, Isabel; González-Álvarez, Julia. Maderas-Cienc Tecnol; Vol. 17 No. 2 (2015); 345-354

Predicting moisture content from basic density and diameter during air drying of Eucalyptus and Corymbia logs

Vinha Zanuncio, Antônio José; Guimarães Carvalho, Amélia; Fernandes da Silva, Liniker; Tarcisio Lima, José; Trugilho, Paulo Fernando; Moreira da Silva, José Reinaldo. Maderas-Cienc Tecnol; Vol. 17 No. 2 (2015); 335-344

Design and efficiency of a small-scale woodchip furnace

Torres-Fuchslocher, Carlos; Varas-Concha, Felipe. Maderas-Cienc Tecnol; Vol. 17 No. 2 (2015); 355-364

Physical and mechanical properties of nanoreinforced particleboard composites

Candan, Zeki; Akbulut, Turgay. Maderas-Cienc Tecnol; Vol. 17 No. 2 (2015); 319-334

Evaluation of wood surface roughness depending on species characteristics

Thoma, Hektor; Peri, Leonidha; Lato, Entela. Maderas-Cienc Tecnol; Vol. 17 No. 2 (2015); 285-292

Effects of thinning on diameter, heartwood, density and drying defects of gmelina arborea

Vallejos, Jonathan; Moya, Roger; Serrano, Rafael. Maderas-Cienc Tecnol; Vol. 17 No. 2 (2015); 365-372

Treatability of Melia composita using vacuum pressure impregnation

Tripathi, Sadhna; Kumar Poonia, Pawan. Maderas-Cienc Tecnol; Vol. 17 No. 2 (2015); 373-384

Liquefied wood as a partial substitute of melamine-urea-formaldehyde and urea-formaldehyde resins

Esteves, Bruno; Martins, João; Martins, Jorge; Cruz-Lopes, Luísa; Vicente, José; Domingos, Idalina. Maderas-Cienc Tecnol; Vol. 17 No. 2 (2015); 277-284

Analytical and experimental studies on stress capacity with modified wood members under combined stresses

Abdolzadeh, H.; Ebrahimi, Gh.; Layeghi, M.; Ghassemieh, M.. Maderas-Cienc Tecnol; Vol. 17 No. 2 (2015); 263-276

Efecto del raleo sobre las propiedades anatómicas de la madera de Pinus taeda

Winck, Rosa Ángela; Fassola, Hugo Enrique; Área, María Cristina. Maderas-Cienc Tecnol; Vol. 17 No. 2 (2015); 391-406

The effect of moisture content on the retention and distribution of nano-titanium dioxide in the wood

Mohammadnia Afrouzi, Younes; Marzbani, Pouya; Omidvar, Asghar Omidvar. Maderas-Cienc Tecnol; Vol. 17 No. 2 (2015); 385-390

Valoración mecanotérmica de una resina biodegradable como agente de acoplamiento de materiales compuestos celulósicos/polímero hidrofóbico

Pulido González, H.; Hernandez, E.; Rabelero Velasco, M.; Sanjuan Raygoza, RJ.; Jasso Gastinel, C.F.. Maderas-Cienc Tecnol; Vol. 16 No. 4 (2014); 463-486

Utilization of temperature kinetics as a method to predict treatment intensity and corresponding treated wood quality: Durability and mechanical properties of thermally modified wood

Candelier, K.; Hannouz, S.; Elaieb, M.; Collet, R.; Dumarçay, S.; Pétrissans, A.; Gérardin, P.; Pétrissans, M.. Maderas-Cienc Tecnol; Vol. 17 No. 2 (2015); 253-262

Prediction of mechanical properties - Modulus of rupture and modulus of elasticity - of five tropical species by nondestructive methods

Baar, Jan; Tippner, Jan; Rademacher, Peter. Maderas-Cienc Tecnol; Vol. 17 No. 2 (2015); 239-252

Universidad del Bío-Bío: Recent submissions

Laboratory experiments on hygrothermal behaviour of real-scale timber walls

Aplicación de celulosa nanofibrilada, en masa y superficie, a la pulpa mecánica de muela de piedra: Una sólida alternativa al tratamiento clásico de refinado

Characterization of the rhizophora particleboard as a tissue-equivalent phantom material bonded with bio–based adhesive

Application of aqueous two phase systems based on polyethylene glycol and sodium citrate for the recovery of phenolic compounds from eucalyptus wood

Predicting moisture content from basic density and diameter during air drying of Eucalyptus and Corymbia logs

Design and efficiency of a small-scale woodchip furnace

Physical and mechanical properties of nanoreinforced particleboard composites

Evaluation of wood surface roughness depending on species characteristics

Effects of thinning on diameter, heartwood, density and drying defects of gmelina arborea

Treatability of Melia composita using vacuum pressure impregnation

Liquefied wood as a partial substitute of melamine-urea-formaldehyde and urea-formaldehyde resins

Analytical and experimental studies on stress capacity with modified wood members under combined stresses

Efecto del raleo sobre las propiedades anatómicas de la madera de Pinus taeda

The effect of moisture content on the retention and distribution of nano-titanium dioxide in the wood

Valoración mecanotérmica de una resina biodegradable como agente de acoplamiento de materiales compuestos celulósicos/polímero hidrofóbico

Utilization of temperature kinetics as a method to predict treatment intensity and corresponding treated wood quality: Durability and mechanical properties of thermally modified wood

Prediction of mechanical properties - Modulus of rupture and modulus of elasticity - of five tropical species by nondestructive methods

Influence of specimen orientation on determination of elesticity in static bending

Phytosanitation of mountain pine beetle infected lodgepole pine using dielectric fields at radio frequencies

Microfibril angle of Eucalyptus grandis wood in relation to the cambial age

Universidad del Bío-Bío: Recent submissions

Laboratory experiments on hygrothermal behaviour of real-scale timber walls ﻿

Aplicación de celulosa nanofibrilada, en masa y superficie, a la pulpa mecánica de muela de piedra: Una sólida alternativa al tratamiento clásico de refinado ﻿

Characterization of the rhizophora particleboard as a tissue-equivalent phantom material bonded with bio–based adhesive ﻿

Application of aqueous two phase systems based on polyethylene glycol and sodium citrate for the recovery of phenolic compounds from eucalyptus wood ﻿

Predicting moisture content from basic density and diameter during air drying of Eucalyptus and Corymbia logs ﻿

Design and efficiency of a small-scale woodchip furnace ﻿

Physical and mechanical properties of nanoreinforced particleboard composites ﻿

Evaluation of wood surface roughness depending on species characteristics ﻿

Effects of thinning on diameter, heartwood, density and drying defects of gmelina arborea ﻿

Treatability of Melia composita using vacuum pressure impregnation ﻿

Liquefied wood as a partial substitute of melamine-urea-formaldehyde and urea-formaldehyde resins ﻿

Analytical and experimental studies on stress capacity with modified wood members under combined stresses ﻿

Efecto del raleo sobre las propiedades anatómicas de la madera de Pinus taeda ﻿

The effect of moisture content on the retention and distribution of nano-titanium dioxide in the wood ﻿

Valoración mecanotérmica de una resina biodegradable como agente de acoplamiento de materiales compuestos celulósicos/polímero hidrofóbico ﻿

Utilization of temperature kinetics as a method to predict treatment intensity and corresponding treated wood quality: Durability and mechanical properties of thermally modified wood ﻿

Prediction of mechanical properties - Modulus of rupture and modulus of elasticity - of five tropical species by nondestructive methods ﻿

Influence of specimen orientation on determination of elesticity in static bending ﻿

Phytosanitation of mountain pine beetle infected lodgepole pine using dielectric fields at radio frequencies ﻿

Microfibril angle of Eucalyptus grandis wood in relation to the cambial age ﻿

Laboratory experiments on hygrothermal behaviour of real-scale timber walls

Aplicación de celulosa nanofibrilada, en masa y superficie, a la pulpa mecánica de muela de piedra: Una sólida alternativa al tratamiento clásico de refinado

Characterization of the rhizophora particleboard as a tissue-equivalent phantom material bonded with bio–based adhesive

Application of aqueous two phase systems based on polyethylene glycol and sodium citrate for the recovery of phenolic compounds from eucalyptus wood

Predicting moisture content from basic density and diameter during air drying of Eucalyptus and Corymbia logs

Design and efficiency of a small-scale woodchip furnace

Physical and mechanical properties of nanoreinforced particleboard composites

Evaluation of wood surface roughness depending on species characteristics

Effects of thinning on diameter, heartwood, density and drying defects of gmelina arborea

Treatability of Melia composita using vacuum pressure impregnation

Liquefied wood as a partial substitute of melamine-urea-formaldehyde and urea-formaldehyde resins

Analytical and experimental studies on stress capacity with modified wood members under combined stresses

Efecto del raleo sobre las propiedades anatómicas de la madera de Pinus taeda

The effect of moisture content on the retention and distribution of nano-titanium dioxide in the wood

Valoración mecanotérmica de una resina biodegradable como agente de acoplamiento de materiales compuestos celulósicos/polímero hidrofóbico

Utilization of temperature kinetics as a method to predict treatment intensity and corresponding treated wood quality: Durability and mechanical properties of thermally modified wood

Prediction of mechanical properties - Modulus of rupture and modulus of elasticity - of five tropical species by nondestructive methods

Influence of specimen orientation on determination of elesticity in static bending

Phytosanitation of mountain pine beetle infected lodgepole pine using dielectric fields at radio frequencies

Microfibril angle of Eucalyptus grandis wood in relation to the cambial age