Show simple item record

Modelación numérica con validación experimental aplicada al estudio del comportamiento de conectores tipo perno de estructuras compuestas de hormigón y acero

dc.contributoren-US
dc.contributorCAPES - Brasiles-ES
dc.creatorBonilla, Jorge
dc.creatorM. Bezerra, Luciano
dc.creatorLarrúa, Rafael
dc.creatorRecarey, Carlos
dc.creatorMirambell, Enrique
dc.date2015-04-30
dc.date.accessioned2019-05-02T21:22:12Z
dc.date.available2019-05-02T21:22:12Z
dc.identifierhttp://www.ricuc.cl/index.php/ric/article/view/523
dc.identifier10.4067/S0718-50732015000100005
dc.identifier.urihttp://revistaschilenas.uchile.cl/handle/2250/82304
dc.descriptionIn this work, the behaviour of stud shear connectors in composite structures is studied, starting from the via numeric simulation of the push out test in a steel beam – with solid concrete slab concrete section is studied. The study considers material non-linearity material of concrete and steel, adopting firstly a bilinear model for both (steel and concrete), and in the second case, to the difference ofdiffering from other authors, the concrete damage plasticity of the concrete. ABAQUS is used to model the push out test. The basis and methodology of the modelmodelling process push out test are explained. The numerical results obtained are in accordance with the experimental results, which . This aspect shows the efficacythat of the finite element method is efficient for the in studying the behaviour of stud shear connector’s behavior. Finally, the capacities of shear connections obtained from the finite element analysis were are compared with to the connection strengths calculated using the American Specification (AISC-LRFD (2005)), European Code (Eurocode 4 (2004)) and Cuban Code (NR-080-2004). ItThis was is observed that, these specifications over estimate this value (capacities of shear connections) in many cases.Rev. ing. constr. [online]. 2015, vol.30, n.1, pp. 53-68. ISSN 0718-5073.  http://dx.doi.org/10.4067/S0718-50732015000100005en-US
dc.descriptionEn este trabajo se realiza un estudio del comportamiento de conectores tipo perno de estructuras compuestas de hormigón y acero mediante la simulación numérica del ensayo push out en sección viga-losa maciza de hormigón. Se analiza el comportamiento de los materiales en régimen no lineal, empleándose en un primer caso un modelo bilineal con criterio de rotura de Von Mises para el acero y el hormigón, y en un segundo caso un Modelo de Daño Plástico para el hormigón. Como herramienta para la modelación numérica se emplea el programa computacional ABAQUS. Se aborda el procedimiento metodológico de modelación numérica del ensayo de conectores. Se observa una buena correspondencia existente entre los resultados numéricos y experimentales, evidenciándose la efectividad del uso del Método de Elementos Finitos para el estudio del comportamiento de conectores. Finalmente, respaldado por los estudios numéricos y experimentales, se realiza unavaloración de precisión en la estimación de la capacidad resistente de los conectores obtenida a partir de las normativas: AISC-LRFD (2005), Eurocódigo 4 (2004) y la Normativa Ramal Cubana NR-080-2004, observando que dichas normativas sobreestiman este valor en muchos casos.Rev. ing. constr. [online]. 2015, vol.30, n.1, pp. 53-68. ISSN 0718-5073.  http://dx.doi.org/10.4067/S0718-50732015000100005es-ES
dc.formatapplication/pdf
dc.formatapplication/pdf
dc.formattext/html
dc.formattext/html
dc.languagespa
dc.languageeng
dc.publisherPontificia Universidad Católica de Chileen-US
dc.relationhttp://www.ricuc.cl/index.php/ric/article/view/523/pdf
dc.relationhttp://www.ricuc.cl/index.php/ric/article/view/523/pdf_1
dc.relationhttp://www.ricuc.cl/index.php/ric/article/view/523/html
dc.relationhttp://www.ricuc.cl/index.php/ric/article/view/523/html_1
dc.relationhttp://www.ricuc.cl/index.php/ric/article/downloadSuppFile/523/59
dc.sourceRevista Ingeniería de Construcción; Vol 30, No 1 (2015); 53-68es-ES
dc.sourceRevista Ingeniería de Construcción; Vol 30, No 1 (2015); 53-68en-US
dc.source0718-5073
dc.source0716-2952
dc.subjecten-US
dc.subjectComposite structures; stud shear connectors; numerical simulation; finite element method; concrete damaged plasticityen-US
dc.subjectes-ES
dc.subjectEstructuras compuestas; conectores perno; simulación numérica; método de elementos finitos; modelo de daño plásticoes-ES
dc.titleNumerical modelling with experimental validation applied to the study of stud connectors behaviour in concrete and steel composite structuresen-US
dc.titleModelación numérica con validación experimental aplicada al estudio del comportamiento de conectores tipo perno de estructuras compuestas de hormigón y aceroes-ES
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/publishedVersion
dc.typeen-US
dc.typeArtículo revisado por pareses-ES


This item appears in the following Collection(s)

Show simple item record