Show simple item record

Compression behaviour of clay bricks prisms, wallets and walls - Coating influence

dc.contributoren-US
dc.creatorAzevedo, António; CONSTRUCT-LFC, Departamento de Engenharia Civil, Universidade do Porto Rua Dr. Roberto Frias, s/n; 4200-465 Porto (Portugal)
dc.creatorDelgado, João Quesado; CONSTRUCT-LFC, Departamento de Engenharia Civil, Universidade do Porto Rua Dr. Roberto Frias, s/n; 4200-465 Porto (Portugal)
dc.creatorGuimarães, Ana; CONSTRUCT-LFC, Departamento de Engenharia Civil, Universidade do Porto Rua Dr. Roberto Frias, s/n; 4200-465 Porto (Portugal)
dc.creatorSilva, Fernando Artur; Departamento de Engenharia Civil, Universidade Católica de Pernambuco Rua do Principe, 526, Boa Vista – Recife (Brazil)
dc.creatorOliveira, Romildo; Departamento de Engenharia Civil, Universidade Católica de Pernambuco Rua do Principe, 526, Boa Vista – Recife (Brazil)
dc.date2019-04-26
dc.identifierhttp://revistadelaconstruccion.uc.cl/index.php/rdlc/article/view/1429
dc.descriptionDOI: 10.7764/RDLC.18.1.123This work describes an experimental study carried out on running bond 195 red clay prisms, of two and three ceramic blocks, with and without cement mortar coating and some samples reinforced with mesh, subjected to axial compression in order to enhance the capacity of masonry. The prisms were subjected to compressive loading and all of them had deformation control on each face with a deflectometer, to obtain information about the structural behaviour of the prisms. The experimental results indicate an increase both in the compressive load capacity of the coated prisms and in those that use coatings based on reinforced mortar, not complying with the specifications of conventional structural mortar. The load ratios of prism/wallettes and prisms with two blocks/prisms with three blocks were satisfactory.  en-US
dc.formatapplication/pdf
dc.languageeng
dc.publisherPONTIFICIA UNIVERSIDAD CATOLICA DE CHILEen-US
dc.relationhttp://revistadelaconstruccion.uc.cl/index.php/rdlc/article/view/1429/383
dc.sourceRevista de la Construcción. Journal of Construction; Vol 18, No 1 (2019): Revista de la Construcción. Journal of Construction; 123-133en-US
dc.source0718-915X
dc.source0717-7925
dc.subjecten-US
dc.subjectClay blocks; Axial compression; Structural masonry; Reinforced mortar; Coating; Experimental testsen-US
dc.titleCompression behaviour of clay bricks prisms, wallets and walls - Coating influenceen-US
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/publishedVersion
dc.typePeer-reviewed Articleen-US


This item appears in the following Collection(s)

Show simple item record