Recently added

Influence of basalt fiber in ultra-high-performance concrete in hybrid mode: a comprehensive study on mechanical properties and microstructure

Sujitha Magdalene.P; Karthikeyan, B.. Revista de la Construcción. Journal of Construction; Vol. 23 No. 1 (2024): Revista de la Construcción. Journal of Construction; 104-128

Feasibility study of using waste badminton string fibers in con-crete by morphological, microstructural and tensile characteristics

M, Kumaresan; S, Sindhu Nachiar; Sekar, Anandh. Revista de la Construcción. Journal of Construction; Vol. 22 No. 3 (2023): Revista de la Construcción. Journal of Construction; 679-693

Nonlinear finite element analysis of steel fiber reinforced concrete beams subjected to impact loads

Serdar, Ahmet Hamdi; Caglar, Naci; Demirtas, Gamze; Saribiyik, Mehmet. Revista de la Construcción. Journal of Construction; Vol. 23 No. 1 (2024): Revista de la Construcción. Journal of Construction; 88-103

Investigation of usability of mineral fiber in stone mastic asphalt

Rasekh, M.A.; Haldenbilen, S.; Zengin , D.. Revista de la Construcción. Journal of Construction; Vol. 22 No. 3 (2023): Revista de la Construcción. Journal of Construction; 569-580

A criticism on strengthening glued laminated timber beams with fibre reinforcement polymers, numerical comparisons between different modelling techniques and strengthening configurations

Çankal, Dilan; Şakar, Gökhan; Kürşat Çelik, Hüseyin. Revista de la Construcción. Journal of Construction; Vol. 22 No. 3 (2023): Revista de la Construcción. Journal of Construction; 661-678

A comparative study between buckling behaviour and statistical analysis of axially loaded fully encased composite columns made with high strength concrete

P, SASIKUMAR. Revista de la Construcción. Journal of Construction; Vol. 22 No. 3 (2023): Revista de la Construcción. Journal of Construction; 694-706

A new hybrid MCDM method for optimizing natural stone se-lection for building envelopes

Ulutaş, Alptekin; Balo, Figen; Topal, Ayse. Revista de la Construcción. Journal of Construction; Vol. 22 No. 3 (2023): Revista de la Construcción. Journal of Construction; 646-660

A comparative study between linear regression analysis and various codes for predicting the mechanical characteristics of poly-mer concrete using R-sand and M-sand

K, Candassamy; J, Sreerambabu; P, Sasikumar. Revista de la Construcción. Journal of Construction; Vol. 23 No. 1 (2024): Revista de la Construcción. Journal of Construction; 129-150

Investigating the effect of elevated temperatures on the utiliza-tion of demolished paving block powders as supplementary cementitious materials

Kim, Jeonghyun; Lee, Donwoo; Ubysz, Andrzej. Revista de la Construcción. Journal of Construction; Vol. 23 No. 1 (2024): Revista de la Construcción. Journal of Construction; 151-163

Self-healing evaluation of bacteria grouted light weight aggregate concrete containing rice husk ash and steel fibers

Anbazhagan, Rajesh; Arunachalam, Karthikeyan; Arunachalam, Sumathi. Revista de la Construcción. Journal of Construction; Vol. 23 No. 1 (2024): Revista de la Construcción. Journal of Construction; 16-30

Influences of nano-clay amount on flexure behavior of concrete identified by acoustic emission

Tayfur, Sena; Ünal , Hasan Yavuz; Alver, Ninel; Pekbey, Yeliz. Revista de la Construcción. Journal of Construction; Vol. 23 No. 1 (2024): Revista de la Construcción. Journal of Construction; 5-15

Heavy aggregate and different admixtures effect on pavings: pyrite, corundum and water-retaining polymer

Ustabas, Ilker; Erdogdu, Sakir; Akyuz, Cihan; Kurt, Zafer; Cakmak, Talip. Revista de la Construcción. Journal of Construction; Vol. 23 No. 1 (2024): Revista de la Construcción. Journal of Construction; 31-46

Evaluation of the uses of treated sawdust as a partial replacement for aggregate in hot mix asphalt

Guesmi, Mohamed Lakhder; Nafa, Zahreddine; Bordjiba, Abdelhak. Revista de la Construcción. Journal of Construction; Vol. 22 No. 3 (2023): Revista de la Construcción. Journal of Construction; 553-568

Recycling waste expanded polystyrene as aggregate in produc-tion of lightweight screed mortar

Çelikten, Serhat; Atabey, İsmail İsa; Almaz Özcan, Zehra; Durak, Uğur; İlkentapar, Serhan; Karahan, Okan; Atiş , Cengiz D.. Revista de la Construcción. Journal of Construction; Vol. 22 No. 3 (2023): Revista de la Construcción. Journal of Construction; 581-596

Revista de la Construcción. Journal of Construction: Recent submissions

Influence of basalt fiber in ultra-high-performance concrete in hybrid mode: a comprehensive study on mechanical properties and microstructure

Feasibility study of using waste badminton string fibers in con-crete by morphological, microstructural and tensile characteristics

Nonlinear finite element analysis of steel fiber reinforced concrete beams subjected to impact loads

Investigation of usability of mineral fiber in stone mastic asphalt

A criticism on strengthening glued laminated timber beams with fibre reinforcement polymers, numerical comparisons between different modelling techniques and strengthening configurations

A comparative study between buckling behaviour and statistical analysis of axially loaded fully encased composite columns made with high strength concrete

A new hybrid MCDM method for optimizing natural stone se-lection for building envelopes

A comparative study between linear regression analysis and various codes for predicting the mechanical characteristics of poly-mer concrete using R-sand and M-sand

Investigating the effect of elevated temperatures on the utiliza-tion of demolished paving block powders as supplementary cementitious materials

Self-healing evaluation of bacteria grouted light weight aggregate concrete containing rice husk ash and steel fibers

Influences of nano-clay amount on flexure behavior of concrete identified by acoustic emission

Heavy aggregate and different admixtures effect on pavings: pyrite, corundum and water-retaining polymer

Evaluation of the uses of treated sawdust as a partial replacement for aggregate in hot mix asphalt

Recycling waste expanded polystyrene as aggregate in produc-tion of lightweight screed mortar

Experimental and numerical investigation of flexural properties of larch beams reinforced with different layer numbers

Optimization of fiber-reinforced deep cement-fly ash mixing column materials

Clay composition patterns and their influence on the adhesive strength of earthen plasters

Using recycled plastic waste as fiber reinforcement on limestone residue mortar

Seismic analysis of RC building frames with vertical mass and stiffness irregularities using adaptive pushover analysis

Effect of sodium silicate and cement on the improvement of engineering properties of organic soil

Revista de la Construcción. Journal of Construction: Recent submissions

Influence of basalt fiber in ultra-high-performance concrete in hybrid mode: a comprehensive study on mechanical properties and microstructure ﻿

Feasibility study of using waste badminton string fibers in con-crete by morphological, microstructural and tensile characteristics ﻿

Nonlinear finite element analysis of steel fiber reinforced concrete beams subjected to impact loads ﻿

Investigation of usability of mineral fiber in stone mastic asphalt ﻿

A criticism on strengthening glued laminated timber beams with fibre reinforcement polymers, numerical comparisons between different modelling techniques and strengthening configurations ﻿

A comparative study between buckling behaviour and statistical analysis of axially loaded fully encased composite columns made with high strength concrete ﻿

A new hybrid MCDM method for optimizing natural stone se-lection for building envelopes ﻿

A comparative study between linear regression analysis and various codes for predicting the mechanical characteristics of poly-mer concrete using R-sand and M-sand ﻿

Investigating the effect of elevated temperatures on the utiliza-tion of demolished paving block powders as supplementary cementitious materials ﻿

Self-healing evaluation of bacteria grouted light weight aggregate concrete containing rice husk ash and steel fibers ﻿

Influences of nano-clay amount on flexure behavior of concrete identified by acoustic emission ﻿

Heavy aggregate and different admixtures effect on pavings: pyrite, corundum and water-retaining polymer ﻿

Evaluation of the uses of treated sawdust as a partial replacement for aggregate in hot mix asphalt ﻿

Recycling waste expanded polystyrene as aggregate in produc-tion of lightweight screed mortar ﻿

Experimental and numerical investigation of flexural properties of larch beams reinforced with different layer numbers ﻿

Optimization of fiber-reinforced deep cement-fly ash mixing column materials ﻿

Clay composition patterns and their influence on the adhesive strength of earthen plasters ﻿

Using recycled plastic waste as fiber reinforcement on limestone residue mortar ﻿

Seismic analysis of RC building frames with vertical mass and stiffness irregularities using adaptive pushover analysis ﻿

Effect of sodium silicate and cement on the improvement of engineering properties of organic soil ﻿

Influence of basalt fiber in ultra-high-performance concrete in hybrid mode: a comprehensive study on mechanical properties and microstructure

Feasibility study of using waste badminton string fibers in con-crete by morphological, microstructural and tensile characteristics

Nonlinear finite element analysis of steel fiber reinforced concrete beams subjected to impact loads

Investigation of usability of mineral fiber in stone mastic asphalt

A criticism on strengthening glued laminated timber beams with fibre reinforcement polymers, numerical comparisons between different modelling techniques and strengthening configurations

A comparative study between buckling behaviour and statistical analysis of axially loaded fully encased composite columns made with high strength concrete

A new hybrid MCDM method for optimizing natural stone se-lection for building envelopes

A comparative study between linear regression analysis and various codes for predicting the mechanical characteristics of poly-mer concrete using R-sand and M-sand

Investigating the effect of elevated temperatures on the utiliza-tion of demolished paving block powders as supplementary cementitious materials

Self-healing evaluation of bacteria grouted light weight aggregate concrete containing rice husk ash and steel fibers

Influences of nano-clay amount on flexure behavior of concrete identified by acoustic emission

Heavy aggregate and different admixtures effect on pavings: pyrite, corundum and water-retaining polymer

Evaluation of the uses of treated sawdust as a partial replacement for aggregate in hot mix asphalt

Recycling waste expanded polystyrene as aggregate in produc-tion of lightweight screed mortar

Experimental and numerical investigation of flexural properties of larch beams reinforced with different layer numbers

Optimization of fiber-reinforced deep cement-fly ash mixing column materials

Clay composition patterns and their influence on the adhesive strength of earthen plasters

Using recycled plastic waste as fiber reinforcement on limestone residue mortar

Seismic analysis of RC building frames with vertical mass and stiffness irregularities using adaptive pushover analysis

Effect of sodium silicate and cement on the improvement of engineering properties of organic soil