Recently added

An alternative approach for increasing the visibility of roads

Terzi, Serdal; Ergezer, Fatih; Saltan, Mehmet; Karahancer, Sebnem; Eriskin, Ekinhan; Uncu, Ismail Serkan; karadag, Oznur; Kurtman, Akay Kurter; Kayakus, Mehmet; Erten, Kemal Muhammet. Revista de la Construcción. Journal of Construction; Vol. 23 No. 2 (2024): Revista de la Construcción. Journal of Construction; 203-217

Simulation of the behavior of reinforced concrete rectangular hollow sandwich plates under the effect of contact explosion through SPH method

Bakir, Dursun; Savas, Sedat; Üstündağ, Hasan. Revista de la Construcción. Journal of Construction; Vol. 23 No. 3 (2024): Revista de la Construccion. Journal of Construction; 554-567

Evaluating the effective factors of BIM for enhancing the construction interface management

Vaardini, U. Sindhu; Shanmugapriya, S.. Revista de la Construcción. Journal of Construction; Vol. 23 No. 2 (2024): Revista de la Construcción. Journal of Construction; 218-229

Investigation of plastic hinge length in high-ductility reinforced concrete shear walls

Tülen, Hacer; Dere, Yunus; Arslan, Musa Hakan. Revista de la Construcción. Journal of Construction; Vol. 23 No. 2 (2024): Revista de la Construcción. Journal of Construction; 177-202

Sustainable and strength-enhanced concrete using microbial consortia

Subitha, T.; Manju, R.; Sasikumar, P.. Revista de la Construcción. Journal of Construction; Vol. 23 No. 2 (2024): Revista de la Construcción. Journal of Construction; 403-412

Properties of self-curing and self-cooling eco-friendly novel green cement-based mortar

Hocaoglu, Ismail; Topçu, İlker Bekir. Revista de la Construcción. Journal of Construction; Vol. 23 No. 2 (2024): Revista de la Construcción. Journal of Construction; 436-456

Nonlinear finite element study on the improvement of torsional strengthening of RC beams with diagonal shear reinforcement

Orman Subasi, Rojda; Caglar, Naci; Demirtas, Gamze; Özturk, Hakan. Revista de la Construcción. Journal of Construction; Vol. 23 No. 3 (2024): Revista de la Construccion. Journal of Construction; 480-496

Effect of waste oyster shell powder as additive on properties and sulfate attack resistance of mortar

Liu, Yu-Wen; Cho, Shih-Wei; Chiou, Pou-Gang. Revista de la Construcción. Journal of Construction; Vol. 23 No. 2 (2024): Revista de la Construcción. Journal of Construction; 164-176

Influence of basalt fiber in ultra-high-performance concrete in hybrid mode: a comprehensive study on mechanical properties and microstructure

Sujitha Magdalene.P; Karthikeyan, B.. Revista de la Construcción. Journal of Construction; Vol. 23 No. 1 (2024): Revista de la Construcción. Journal of Construction; 104-128

Feasibility study of using waste badminton string fibers in con-crete by morphological, microstructural and tensile characteristics

M, Kumaresan; S, Sindhu Nachiar; Sekar, Anandh. Revista de la Construcción. Journal of Construction; Vol. 22 No. 3 (2023): Revista de la Construcción. Journal of Construction; 679-693

Nonlinear finite element analysis of steel fiber reinforced concrete beams subjected to impact loads

Serdar, Ahmet Hamdi; Caglar, Naci; Demirtas, Gamze; Saribiyik, Mehmet. Revista de la Construcción. Journal of Construction; Vol. 23 No. 1 (2024): Revista de la Construcción. Journal of Construction; 88-103

Investigation of usability of mineral fiber in stone mastic asphalt

Rasekh, M.A.; Haldenbilen, S.; Zengin , D.. Revista de la Construcción. Journal of Construction; Vol. 22 No. 3 (2023): Revista de la Construcción. Journal of Construction; 569-580

A criticism on strengthening glued laminated timber beams with fibre reinforcement polymers, numerical comparisons between different modelling techniques and strengthening configurations

Çankal, Dilan; Şakar, Gökhan; Kürşat Çelik, Hüseyin. Revista de la Construcción. Journal of Construction; Vol. 22 No. 3 (2023): Revista de la Construcción. Journal of Construction; 661-678

A comparative study between buckling behaviour and statistical analysis of axially loaded fully encased composite columns made with high strength concrete

P, SASIKUMAR. Revista de la Construcción. Journal of Construction; Vol. 22 No. 3 (2023): Revista de la Construcción. Journal of Construction; 694-706

A new hybrid MCDM method for optimizing natural stone se-lection for building envelopes

Ulutaş, Alptekin; Balo, Figen; Topal, Ayse. Revista de la Construcción. Journal of Construction; Vol. 22 No. 3 (2023): Revista de la Construcción. Journal of Construction; 646-660

A comparative study between linear regression analysis and various codes for predicting the mechanical characteristics of poly-mer concrete using R-sand and M-sand

K, Candassamy; J, Sreerambabu; P, Sasikumar. Revista de la Construcción. Journal of Construction; Vol. 23 No. 1 (2024): Revista de la Construcción. Journal of Construction; 129-150

Investigating the effect of elevated temperatures on the utiliza-tion of demolished paving block powders as supplementary cementitious materials

Kim, Jeonghyun; Lee, Donwoo; Ubysz, Andrzej. Revista de la Construcción. Journal of Construction; Vol. 23 No. 1 (2024): Revista de la Construcción. Journal of Construction; 151-163

Revista de la Construcción. Journal of Construction: Recent submissions

An alternative approach for increasing the visibility of roads

Simulation of the behavior of reinforced concrete rectangular hollow sandwich plates under the effect of contact explosion through SPH method

Evaluating the effective factors of BIM for enhancing the construction interface management

Investigation of plastic hinge length in high-ductility reinforced concrete shear walls

Sustainable and strength-enhanced concrete using microbial consortia

Properties of self-curing and self-cooling eco-friendly novel green cement-based mortar

Nonlinear finite element study on the improvement of torsional strengthening of RC beams with diagonal shear reinforcement

Effect of waste oyster shell powder as additive on properties and sulfate attack resistance of mortar

Influence of basalt fiber in ultra-high-performance concrete in hybrid mode: a comprehensive study on mechanical properties and microstructure

Feasibility study of using waste badminton string fibers in con-crete by morphological, microstructural and tensile characteristics

Nonlinear finite element analysis of steel fiber reinforced concrete beams subjected to impact loads

Investigation of usability of mineral fiber in stone mastic asphalt

A criticism on strengthening glued laminated timber beams with fibre reinforcement polymers, numerical comparisons between different modelling techniques and strengthening configurations

A comparative study between buckling behaviour and statistical analysis of axially loaded fully encased composite columns made with high strength concrete

A new hybrid MCDM method for optimizing natural stone se-lection for building envelopes

A comparative study between linear regression analysis and various codes for predicting the mechanical characteristics of poly-mer concrete using R-sand and M-sand

Investigating the effect of elevated temperatures on the utiliza-tion of demolished paving block powders as supplementary cementitious materials

Self-healing evaluation of bacteria grouted light weight aggregate concrete containing rice husk ash and steel fibers

Influences of nano-clay amount on flexure behavior of concrete identified by acoustic emission

Heavy aggregate and different admixtures effect on pavings: pyrite, corundum and water-retaining polymer

Revista de la Construcción. Journal of Construction: Recent submissions

An alternative approach for increasing the visibility of roads ﻿

Simulation of the behavior of reinforced concrete rectangular hollow sandwich plates under the effect of contact explosion through SPH method ﻿

Evaluating the effective factors of BIM for enhancing the construction interface management ﻿

Investigation of plastic hinge length in high-ductility reinforced concrete shear walls ﻿

Sustainable and strength-enhanced concrete using microbial consortia ﻿

Properties of self-curing and self-cooling eco-friendly novel green cement-based mortar ﻿

Nonlinear finite element study on the improvement of torsional strengthening of RC beams with diagonal shear reinforcement ﻿

Effect of waste oyster shell powder as additive on properties and sulfate attack resistance of mortar ﻿

Influence of basalt fiber in ultra-high-performance concrete in hybrid mode: a comprehensive study on mechanical properties and microstructure ﻿

Feasibility study of using waste badminton string fibers in con-crete by morphological, microstructural and tensile characteristics ﻿

Nonlinear finite element analysis of steel fiber reinforced concrete beams subjected to impact loads ﻿

Investigation of usability of mineral fiber in stone mastic asphalt ﻿

A criticism on strengthening glued laminated timber beams with fibre reinforcement polymers, numerical comparisons between different modelling techniques and strengthening configurations ﻿

A comparative study between buckling behaviour and statistical analysis of axially loaded fully encased composite columns made with high strength concrete ﻿

A new hybrid MCDM method for optimizing natural stone se-lection for building envelopes ﻿

A comparative study between linear regression analysis and various codes for predicting the mechanical characteristics of poly-mer concrete using R-sand and M-sand ﻿

Investigating the effect of elevated temperatures on the utiliza-tion of demolished paving block powders as supplementary cementitious materials ﻿

Self-healing evaluation of bacteria grouted light weight aggregate concrete containing rice husk ash and steel fibers ﻿

Influences of nano-clay amount on flexure behavior of concrete identified by acoustic emission ﻿

Heavy aggregate and different admixtures effect on pavings: pyrite, corundum and water-retaining polymer ﻿

An alternative approach for increasing the visibility of roads

Simulation of the behavior of reinforced concrete rectangular hollow sandwich plates under the effect of contact explosion through SPH method

Evaluating the effective factors of BIM for enhancing the construction interface management

Investigation of plastic hinge length in high-ductility reinforced concrete shear walls

Sustainable and strength-enhanced concrete using microbial consortia

Properties of self-curing and self-cooling eco-friendly novel green cement-based mortar

Nonlinear finite element study on the improvement of torsional strengthening of RC beams with diagonal shear reinforcement

Effect of waste oyster shell powder as additive on properties and sulfate attack resistance of mortar

Influence of basalt fiber in ultra-high-performance concrete in hybrid mode: a comprehensive study on mechanical properties and microstructure

Feasibility study of using waste badminton string fibers in con-crete by morphological, microstructural and tensile characteristics

Nonlinear finite element analysis of steel fiber reinforced concrete beams subjected to impact loads

Investigation of usability of mineral fiber in stone mastic asphalt

A criticism on strengthening glued laminated timber beams with fibre reinforcement polymers, numerical comparisons between different modelling techniques and strengthening configurations

A comparative study between buckling behaviour and statistical analysis of axially loaded fully encased composite columns made with high strength concrete

A new hybrid MCDM method for optimizing natural stone se-lection for building envelopes

A comparative study between linear regression analysis and various codes for predicting the mechanical characteristics of poly-mer concrete using R-sand and M-sand

Investigating the effect of elevated temperatures on the utiliza-tion of demolished paving block powders as supplementary cementitious materials

Self-healing evaluation of bacteria grouted light weight aggregate concrete containing rice husk ash and steel fibers

Influences of nano-clay amount on flexure behavior of concrete identified by acoustic emission

Heavy aggregate and different admixtures effect on pavings: pyrite, corundum and water-retaining polymer