Recently added

Relación entre parámetros de producción y propiedades estructurales de madera laminada encolada de Eucalyptus grandis

Moya, Laura; Pérez Gomar, Carolina; Vega, Abel; Sánchez, Alicia; Torino, Ignacio; Baño, Vanesa. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 327-340

Analysis of wood products from an added value perspective: The uruguayan forestry case

Dieste, Andrés; Noel Cabrera, María; Clavijo, Leonardo; Cassella, Norberto. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 305-316

Layer thickness performances of coatings on MDF: Polyurethane and cellulosic paints

Seda Erdinler, Emine; Huseyin Koc, Kucuk; Dilik, Tuncer; Hazir, Ender. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 317-326

Characterization of thermally modified short and long rotation teaks and the effects on coatings performance

Adina Pratiwi, Lisa; Darmawan, Wayan; Priadi, Trisna; George, Béatrice; Merlin, André; Gérardin, Christine; Dumarçay, Stéphane; Gérardin, Philippe. Maderas-Cienc Tecnol; Vol. 21 No. 2 (2019); 209-222

Timber grading of Pinus uncinata, a lesser known pine species from the pyrenean mountain range

Burgers, Agnès; Montero, Cédric; Gené Sera, Jordi; Vilches Casals, Marcel; Correal Modol, Eduard; Langbour, Patrick; Thibaut, Bernard. Maderas-Cienc Tecnol; Vol. 21 No. 2 (2019); 261-276

Assessing the natural durability of different tropical timbers in soil-bed tests

Colín-Urieta, Serafín; Carrillo-Parra, Artemio; Rutiaga-Quiñones, José Guadalupe; López-Albarran, Pablo; Gabriel Parra, Rosalio; Corral-Rivas, José Javier. Maderas-Cienc Tecnol; Vol. 21 No. 2 (2019); 231-238

Fibre morphological variations of some nigerian guinea savannah wood species

Aderinsola Sadiku, Nusirat; Kafilat Adejoke, Abdkareem. Maderas-Cienc Tecnol; Vol. 21 No. 2 (2019); 239-248

Biological resistance of heat-treated wood of Pinus caribaea and Eucalyptus saligna

Otávio Brito, José; Francisco Dias Júnior, Ananias; Queiroz Lana, Artur; Rogério Andrade, Carlos; Fernandes Bernardes, Francisco. Maderas-Cienc Tecnol; Vol. 21 No. 2 (2019); 223-230

Scaling and modeling the creep of Eucalyptus globulus

Barroso Lopes, Duarte; Emílio Matos, João. Maderas-Cienc Tecnol; Vol. 21 No. 2 (2019); 249-260

Characterization of pacific silver fir impregnated with extractives from western redcedar

Stirling, Rod; Kus, Stacey. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 285-296

Veinte años después: Enfocados en las Ciencias de la Madera

Ananias, Ruben A.. Maderas-Cienc Tecnol; Vol. 20 No. 4 (2018); 529-530

Energy valorization of woody biomass by torrefaction treatment: a brazilian experimental study

Gusmão Figueiró, Clarissa; Rocha Vital, Benedito; de Cássia Oliveira Carneiro, Angélica; Miguel Simões da Silva, Carlos; Alves Magalhães, Mateus; de Freitas Fialho, Lucas. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 297-304

Effectiveness of Copper chrome arsenate and used engine oil in protecting fencing posts of Ugandan grown eucalypt clone GC550 and Phoenix reclinata against termite attack

Mugabi, P.; Otuko, E.. Maderas-Cienc Tecnol; Vol. 21 No. 1 (2019); 97-104

Maderas: Ciencia y Tecnología: Recent submissions

Relación entre parámetros de producción y propiedades estructurales de madera laminada encolada de Eucalyptus grandis

Analysis of wood products from an added value perspective: The uruguayan forestry case

Layer thickness performances of coatings on MDF: Polyurethane and cellulosic paints

Characterization of thermally modified short and long rotation teaks and the effects on coatings performance

Timber grading of Pinus uncinata, a lesser known pine species from the pyrenean mountain range

Assessing the natural durability of different tropical timbers in soil-bed tests

Fibre morphological variations of some nigerian guinea savannah wood species

Biological resistance of heat-treated wood of Pinus caribaea and Eucalyptus saligna

Scaling and modeling the creep of Eucalyptus globulus

Characterization of pacific silver fir impregnated with extractives from western redcedar

Veinte años después: Enfocados en las Ciencias de la Madera

Energy valorization of woody biomass by torrefaction treatment: a brazilian experimental study

Effectiveness of Copper chrome arsenate and used engine oil in protecting fencing posts of Ugandan grown eucalypt clone GC550 and Phoenix reclinata against termite attack

Stability of planed and precision planed solid wood surfaces due to wetting

Process layout planning and optimised product range selection in manufacture of wooden construction sets

Toxicity potential of heartwood extractives from two mulberry species against Heterotermes indicola

Dynamic and static mechanical properties of eucalyptus nitens thermally modified in an open and closed reactor system

Effects of saturated vapor pre-steaming on drying strain in asian white birch: Experimentation and modelling

Thermal degradation of oriental beech wood impregnated with different inorganic salts

Machining properties of Melia dubia wood

Maderas: Ciencia y Tecnología: Recent submissions

Relación entre parámetros de producción y propiedades estructurales de madera laminada encolada de Eucalyptus grandis ﻿

Analysis of wood products from an added value perspective: The uruguayan forestry case ﻿

Layer thickness performances of coatings on MDF: Polyurethane and cellulosic paints ﻿

Characterization of thermally modified short and long rotation teaks and the effects on coatings performance ﻿

Timber grading of Pinus uncinata, a lesser known pine species from the pyrenean mountain range ﻿

Assessing the natural durability of different tropical timbers in soil-bed tests ﻿

Fibre morphological variations of some nigerian guinea savannah wood species ﻿

Biological resistance of heat-treated wood of Pinus caribaea and Eucalyptus saligna ﻿

Scaling and modeling the creep of Eucalyptus globulus ﻿

Characterization of pacific silver fir impregnated with extractives from western redcedar ﻿

Veinte años después: Enfocados en las Ciencias de la Madera ﻿

Energy valorization of woody biomass by torrefaction treatment: a brazilian experimental study ﻿

Effectiveness of Copper chrome arsenate and used engine oil in protecting fencing posts of Ugandan grown eucalypt clone GC550 and Phoenix reclinata against termite attack ﻿

Stability of planed and precision planed solid wood surfaces due to wetting ﻿

Process layout planning and optimised product range selection in manufacture of wooden construction sets ﻿

Toxicity potential of heartwood extractives from two mulberry species against Heterotermes indicola ﻿

Dynamic and static mechanical properties of eucalyptus nitens thermally modified in an open and closed reactor system ﻿

Effects of saturated vapor pre-steaming on drying strain in asian white birch: Experimentation and modelling ﻿

Thermal degradation of oriental beech wood impregnated with different inorganic salts ﻿

Machining properties of Melia dubia wood ﻿

Relación entre parámetros de producción y propiedades estructurales de madera laminada encolada de Eucalyptus grandis

Analysis of wood products from an added value perspective: The uruguayan forestry case

Layer thickness performances of coatings on MDF: Polyurethane and cellulosic paints

Characterization of thermally modified short and long rotation teaks and the effects on coatings performance

Timber grading of Pinus uncinata, a lesser known pine species from the pyrenean mountain range

Assessing the natural durability of different tropical timbers in soil-bed tests

Fibre morphological variations of some nigerian guinea savannah wood species

Biological resistance of heat-treated wood of Pinus caribaea and Eucalyptus saligna

Scaling and modeling the creep of Eucalyptus globulus

Characterization of pacific silver fir impregnated with extractives from western redcedar

Veinte años después: Enfocados en las Ciencias de la Madera

Energy valorization of woody biomass by torrefaction treatment: a brazilian experimental study

Effectiveness of Copper chrome arsenate and used engine oil in protecting fencing posts of Ugandan grown eucalypt clone GC550 and Phoenix reclinata against termite attack

Stability of planed and precision planed solid wood surfaces due to wetting

Process layout planning and optimised product range selection in manufacture of wooden construction sets

Toxicity potential of heartwood extractives from two mulberry species against Heterotermes indicola

Dynamic and static mechanical properties of eucalyptus nitens thermally modified in an open and closed reactor system

Effects of saturated vapor pre-steaming on drying strain in asian white birch: Experimentation and modelling

Thermal degradation of oriental beech wood impregnated with different inorganic salts

Machining properties of Melia dubia wood