Recently added

The quality comparison of particleboards produced from heartwood and sapwood of european larch

Bardak, Selahattin; Nemli, Gökay; Bardak, Timuçin. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 511-520

Mechanical characteristics of impregnated white jabon wood (Anthocephalus cadamba) using merbau extractives and selected polymerised merbau extractives

Malik, Jamaludin; Ozarska, Barbara. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 573-586

Optimization of wood machining parameters in cnc routers: Taguchi orthogonal array based simulated angling algorithm

Hazir, Ender; Hüseyin Koc, Kücük. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 493-510

Recommendation of non-destructive sampling method for density estimation of the eucalyptus wood

Andrade de Pádua, Franciane; Otávio Poletto Tomeleri, João; Pires Franco, Mariana; Reinaldo Moreira da Silva, José; Fernando Trugilho, Paulo. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 565-572

Assessment of physical, mechanical, and biological properties of bamboo plastic composite made with polylactic acid

Dehghan, Moein; Faezipour, Mehdi; Azizi, Majid; Zarea Hosseinabadi, Hamid; Bari, Ehsan; D. Nicholas, Darrel. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 599-610

Investigation of an alternative testing protocol to determine the shear strength of bamboo parallel to the grain

Luisa Cantos, Gabrielle; F. Lopez, Luis; M. de Jesus, Richard; Salzer, Corinna; E. O. Garciano, Lessandro. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 559-564

Physicochemical properties of Pinus massoniana wood subjected to silicone oil heat treatment

Edet OKON, Kufre; Ime UDOAKPAN, Ubong. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 531-544

Influence of combined heat treatment and densification on mechanical properties of poplar wood

Düzkale Sözbir, Gonca; Bektaş, İbrahim; Kılıç Ak, Ayşenur. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 481-492

Colorimetría en la madera de Prosopis alba

Cisneros, A. B.; Nisgoski, S.; Moglia, J.G.; Córdoba, M.. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 393-404

Resistance improvement of rubberwood treated with zinc oxide nanoparticles and phenolic resin against white-rot fungi, Pycnoporus sanguineus

Khairun Anwar Uyup, Mohd; Khadiran, Tumirah; Husain, Hamdan; Salim, Sabiha; Abdullah Siam, Nordahlia; Seng Hua, Lee. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 457-466

Variacion del contenido de humedad verde y de la densidad basica de la madera en arboles de Eucalyptus nitens con dimensiones aserrables

Omonte, Margarette; Sáez-Carrillo, Katia; A. Ananías, Rubén; Valenzuela-Hurtado, Luis. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 413-424

Evaluation of degradation in chemical compounds of wood in historical buildings using ft-ir and ft-raman vibrational spectroscopy

Mahdi Moosavi Nejad, Seyed; Madhoushi, Mehrab; Vakili, Mohammad; Rasouli, Davood. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 381-392

Crystallinity of cellulose microfibers derived from Cistus ladanifer and Erica arborea shrubs

Carrión-Prieto, Paula; Martín-Ramos, Pablo; Hernández-Navarro, Salvador; Sánchez-Sastre, Luis F.; Marcos-Robles, José Luís; Martín-Gil, Jesús. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 447-456

Evaluation of dimensional stability, surface roughness, colour, flexural properties and decay resistance of thermally modified Acacia auriculiformis

Shukla, S.R.. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 433-446

Decay resistance of scotch pine wood impregnated with Agaricus campestris bio-protective extract

Yildiz, Sibel; C. Yildiz, Ümit; Yilmaz, Ayşenur. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 405-412

A new approach to wood protection: Preliminary study of biologically synthesized copper oxide nanoparticle formulation as an environmental friendly wood protectant against decay fungi and termites

Shiny, K. S.; Sundararaj, R.; Mamatha, N.; Lingappa, B.. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 347-356

Application of resource efficient and cleaner production through best management practice in a pallet manufacturer sawmill located in the city of Puyo-Ecuador

Vargas, Blanca; Miño, Gloria; Vega, Paúl; Mariño, Jessica. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 367-380

Bio-Coal Production With Agroforestry Biomass In Brazil

de Freitas Fialho, Lucas; de Cássia Oliveira Carneiro, Angélica; Marcia Macedo Ladeira Carvalho, Ana; Gusmão Figueiró, Clarissa; Miguel Simões da Silva, Carlos; Alves Magalhães, Mateus; Costa Peres, Letícia. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 357-366

Carbon stored by furnishing wood-based products: An Italian case study

Negro, Francesco; Bergman, Richard. Maderas-Cienc Tecnol; Vol. 21 No. 1 (2019); 65-76

Effect of brown rot degradation on mass loss and compressive strength of chinese poplar (Populus simonii)

Xu, Huadong; Di, Yanan; Cappellazzi, Jed; J. Morrell, Jeffrey. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 341-346

Maderas: Ciencia y Tecnología: Recent submissions

The quality comparison of particleboards produced from heartwood and sapwood of european larch ﻿

Mechanical characteristics of impregnated white jabon wood (Anthocephalus cadamba) using merbau extractives and selected polymerised merbau extractives ﻿

Optimization of wood machining parameters in cnc routers: Taguchi orthogonal array based simulated angling algorithm ﻿

Recommendation of non-destructive sampling method for density estimation of the eucalyptus wood ﻿

Assessment of physical, mechanical, and biological properties of bamboo plastic composite made with polylactic acid ﻿

Investigation of an alternative testing protocol to determine the shear strength of bamboo parallel to the grain ﻿

Physicochemical properties of Pinus massoniana wood subjected to silicone oil heat treatment ﻿

Influence of combined heat treatment and densification on mechanical properties of poplar wood ﻿

Colorimetría en la madera de Prosopis alba ﻿

Resistance improvement of rubberwood treated with zinc oxide nanoparticles and phenolic resin against white-rot fungi, Pycnoporus sanguineus ﻿

Variacion del contenido de humedad verde y de la densidad basica de la madera en arboles de Eucalyptus nitens con dimensiones aserrables ﻿

Evaluation of degradation in chemical compounds of wood in historical buildings using ft-ir and ft-raman vibrational spectroscopy ﻿

Crystallinity of cellulose microfibers derived from Cistus ladanifer and Erica arborea shrubs ﻿

Evaluation of dimensional stability, surface roughness, colour, flexural properties and decay resistance of thermally modified Acacia auriculiformis ﻿

Decay resistance of scotch pine wood impregnated with Agaricus campestris bio-protective extract ﻿

A new approach to wood protection: Preliminary study of biologically synthesized copper oxide nanoparticle formulation as an environmental friendly wood protectant against decay fungi and termites ﻿

Application of resource efficient and cleaner production through best management practice in a pallet manufacturer sawmill located in the city of Puyo-Ecuador ﻿

Bio-Coal Production With Agroforestry Biomass In Brazil ﻿

Carbon stored by furnishing wood-based products: An Italian case study ﻿

Effect of brown rot degradation on mass loss and compressive strength of chinese poplar (Populus simonii) ﻿