Recently added

Ultrasonic phytosanitation of pinewood nematode infected wood

Sohi, Amir; Uzunovic, Adnan; Avramidis, Stavros. Maderas-Cienc Tecnol; Vol. 18 No. 1 (2016); 99-104

Timber wastes torrefaction for energy use

da Silva Grassmann, Guilherme; Rogério Andrade, Carlos; Dias Júnior, Ananias Francisco; da Silva Júnior, Francides Gomes; Otávio Brito, José. Maderas-Cienc Tecnol; Vol. 18 No. 1 (2016); 105-112

Plasticity increase of beech veneer by steaming and gaseous ammonia treatment

Šprdlík, Václav; Brabec, Martin; Mihailović, Stefan; Rademacher, Peter. Maderas-Cienc Tecnol; Vol. 18 No. 1 (2016); 91-98

Mechanical, morphological and thermal properties of nano-boron nitride treated wood materials

Aydemir, Deniz; Civi, Busra; Alsan, Mizgin; Can, Ahmet; Sivrikaya, Huseyin; Gunduz, Gokhan; Wang, Alice. Maderas-Cienc Tecnol; Vol. 18 No. 1 (2016); 19-32

A preliminary investigation of Nigerian Gmelina arborea and Bambusa vulgaris for pulp and paper production

Akeem Azeez, Mayowa; Andrew, Jerome E.; Bruce Sithole, B.. Maderas-Cienc Tecnol; Vol. 18 No. 1 (2016); 65-78

Analysis of the mechanical properties of wood-plastic composites based on agriculture chili pepper waste

Valles-Rosales, Delia Julieta; Rodríguez-Picón, Luis Alberto; Méndez-González, Luis Carlos; del Valle-Carrasco, Arturo; Alodan, Haytham. Maderas-Cienc Tecnol; Vol. 18 No. 1 (2016); 43-54

The influence of short-term thermo-mechanical densification on the surface wettability of wood veneers

Bekhta, Pavlo; Krystofiak, Tomasz. Maderas-Cienc Tecnol; Vol. 18 No. 1 (2016); 79-90

Evaluation of the mechanical and physical properties of particleboard manufactured from canola (Brassica napus) straws

Kord, Behzad; Zare, Hossein; Hosseinzadeh, Abdollah. Maderas-Cienc Tecnol; Vol. 18 No. 1 (2016); 9-18

Decay resistance of four fast-growing Eucalypts wood exposed to three types of fields

de Avila Delucis, Rafael; Gonzales de Cademartori, Pedro Henrique; Missio, André Luiz; Gatto, Darci Alberto. Maderas-Cienc Tecnol; Vol. 18 No. 1 (2016); 33-42

Effect of microwave treatment on the impregnability and mechanical properties of Eucalyptus globulus wood

Hermoso, Eva; Vega, Abel. Maderas-Cienc Tecnol; Vol. 18 No. 1 (2016); 55-64

Empirical statistical model for predicting wood properties of Paulownia fortunie. Part 1: Physical and biometrical properties

Hassankhani, Mehdi; Kord, Behzad; Mehdi Pourpasha, Mohammad. Maderas-Cienc Tecnol; Vol. 17 No. 4 (2015); 912-930

Cutting distance as factor to evaluate the quality of wood machined surfaces: A preliminary study

Aguilera, Alfredo; Rolleri, Aldo; Burgos, Francisco. Maderas-Cienc Tecnol; Vol. 18 No. 1 (2016); 3-8

Mechanical, thermal, morphological properties and decay resistance of filled hazelnut husk polymer composites

Tufan, Mürşit; Akbaş, Selçuk; Güleç, Türker; Taşçıoğlu, Cihat; Hakkı Alma, M.. Maderas-Cienc Tecnol; Vol. 17 No. 4 (2015); 865-874

Properties of osb panels with veneer inclusion

Farinassi Mendes, Rafael; da Silva César, Antônia Amanda; Gomes da Silva, Marcela; Marin Mendes, Lourival; Guimarães Carvalho, Amélia. Maderas-Cienc Tecnol; Vol. 17 No. 4 (2015); 843-856

The effect of traditional hygro-thermal pretreatments on the acoustical characteristics of white mulberry wood (Morus alba)

Se Golpayegani, Aida; Brémaud, Iris; Thevenon, Marie-France; Pourtahmasi, Kambiz; Gril, Joseph. Maderas-Cienc Tecnol; Vol. 17 No. 4 (2015); 821-832

Universidad del Bío-Bío: Recent submissions

Ultrasonic phytosanitation of pinewood nematode infected wood

Timber wastes torrefaction for energy use

Plasticity increase of beech veneer by steaming and gaseous ammonia treatment

Mechanical, morphological and thermal properties of nano-boron nitride treated wood materials

A preliminary investigation of Nigerian Gmelina arborea and Bambusa vulgaris for pulp and paper production

Analysis of the mechanical properties of wood-plastic composites based on agriculture chili pepper waste

The influence of short-term thermo-mechanical densification on the surface wettability of wood veneers

Evaluation of the mechanical and physical properties of particleboard manufactured from canola (Brassica napus) straws

Decay resistance of four fast-growing Eucalypts wood exposed to three types of fields

Effect of microwave treatment on the impregnability and mechanical properties of Eucalyptus globulus wood

Empirical statistical model for predicting wood properties of Paulownia fortunie. Part 1: Physical and biometrical properties

Cutting distance as factor to evaluate the quality of wood machined surfaces: A preliminary study

Mechanical, thermal, morphological properties and decay resistance of filled hazelnut husk polymer composites

Properties of osb panels with veneer inclusion

The effect of traditional hygro-thermal pretreatments on the acoustical characteristics of white mulberry wood (Morus alba)

Effect of extractives on wood color of heat treated Pinus radiata and Eucalyptus pellita

Evaluation of axial impregnation as an alternative to classical wood vacuum pressure impregnation method

Effects of oleothermal treatment and polydimethylsiloxane (PDMS) coating on natural weathering of beech and fir woods

Dimensional and morphological analysis of the detritus from six european wood boring insects

Kraft pulping properties of european black Pine cone

Universidad del Bío-Bío: Recent submissions

Ultrasonic phytosanitation of pinewood nematode infected wood ﻿

Timber wastes torrefaction for energy use ﻿

Plasticity increase of beech veneer by steaming and gaseous ammonia treatment ﻿

Mechanical, morphological and thermal properties of nano-boron nitride treated wood materials ﻿

A preliminary investigation of Nigerian Gmelina arborea and Bambusa vulgaris for pulp and paper production ﻿

Analysis of the mechanical properties of wood-plastic composites based on agriculture chili pepper waste ﻿

The influence of short-term thermo-mechanical densification on the surface wettability of wood veneers ﻿

Evaluation of the mechanical and physical properties of particleboard manufactured from canola (Brassica napus) straws ﻿

Decay resistance of four fast-growing Eucalypts wood exposed to three types of fields ﻿

Effect of microwave treatment on the impregnability and mechanical properties of Eucalyptus globulus wood ﻿

Empirical statistical model for predicting wood properties of Paulownia fortunie. Part 1: Physical and biometrical properties ﻿

Cutting distance as factor to evaluate the quality of wood machined surfaces: A preliminary study ﻿

Mechanical, thermal, morphological properties and decay resistance of filled hazelnut husk polymer composites ﻿

Properties of osb panels with veneer inclusion ﻿

The effect of traditional hygro-thermal pretreatments on the acoustical characteristics of white mulberry wood (Morus alba) ﻿

Effect of extractives on wood color of heat treated Pinus radiata and Eucalyptus pellita ﻿

Evaluation of axial impregnation as an alternative to classical wood vacuum pressure impregnation method ﻿

Effects of oleothermal treatment and polydimethylsiloxane (PDMS) coating on natural weathering of beech and fir woods ﻿

Dimensional and morphological analysis of the detritus from six european wood boring insects ﻿

Kraft pulping properties of european black Pine cone ﻿

Ultrasonic phytosanitation of pinewood nematode infected wood

Timber wastes torrefaction for energy use

Plasticity increase of beech veneer by steaming and gaseous ammonia treatment

Mechanical, morphological and thermal properties of nano-boron nitride treated wood materials

A preliminary investigation of Nigerian Gmelina arborea and Bambusa vulgaris for pulp and paper production

Analysis of the mechanical properties of wood-plastic composites based on agriculture chili pepper waste

The influence of short-term thermo-mechanical densification on the surface wettability of wood veneers

Evaluation of the mechanical and physical properties of particleboard manufactured from canola (Brassica napus) straws

Decay resistance of four fast-growing Eucalypts wood exposed to three types of fields

Effect of microwave treatment on the impregnability and mechanical properties of Eucalyptus globulus wood

Empirical statistical model for predicting wood properties of Paulownia fortunie. Part 1: Physical and biometrical properties

Cutting distance as factor to evaluate the quality of wood machined surfaces: A preliminary study

Mechanical, thermal, morphological properties and decay resistance of filled hazelnut husk polymer composites

Properties of osb panels with veneer inclusion

The effect of traditional hygro-thermal pretreatments on the acoustical characteristics of white mulberry wood (Morus alba)

Effect of extractives on wood color of heat treated Pinus radiata and Eucalyptus pellita

Evaluation of axial impregnation as an alternative to classical wood vacuum pressure impregnation method

Effects of oleothermal treatment and polydimethylsiloxane (PDMS) coating on natural weathering of beech and fir woods

Dimensional and morphological analysis of the detritus from six european wood boring insects

Kraft pulping properties of european black Pine cone