Recently added

Sound pressure as a tool in the assessment of the surface roughness on medium density fibreboard rip sawing process

Aguilera, Alfredo; Barros, José Luis. Maderas-Cienc Tecnol; Vol. 12 No. 3 (2010); 159-170

Influence of veneer quality on beech LVL mechanical properties

Daoui, Abdelhakim; Descamps, Clément; Marchal, Rémy; Zerizer, Abdellatif. Maderas-Cienc Tecnol; Vol. 13 No. 1 (2011); 69-84

Developments in undergraduate wood science education at Stellenbosch University, South Africa

Rypstra, Tim. Maderas-Cienc Tecnol; Vol. 13 No. 1 (2011); 117-126

Condensed tannin reactivity inhibition by internal rearrangements: Detection by CP-MAS 13C NMR

Navarrete, P.; Pizzi, A.; Bertaud, F.; Rigolet, S.. Maderas-Cienc Tecnol; Vol. 13 No. 1 (2011); 59-68

Lignocellulosic composites from brazilian giant bamboo (Guadua magna) Part 1: Properties of resin bonded particleboards

Arruda, Larissa M.; Del Menezzi, Cláudio H. S.; Teixeira, Divino E.; De Araújo, Priscila C.. Maderas-Cienc Tecnol; Vol. 13 No. 1 (2011); 49-58

Chemical modification of cellulose by acylation: Application to adsorption of methylene blue

Bouhdadi, R.; Benhadi, S.; Molina, S.; George, B.; El Moussaouiti, M.; Merlin, A.. Maderas-Cienc Tecnol; Vol. 13 No. 1 (2011); 105-116

Timber management practices and timber species used by small scale furniture workshops in Uganda

Sseremba, O. E.; Kaboggoza, J. R. S.; Ziraba, N. Y.; Mugabi, P.; Banana, A. Y.; Zziwa, A.; Kambugu, R. K.; Kizito, S.; Syofuna, A.; Ndawula, J.. Maderas-Cienc Tecnol; Vol. 13 No. 3 (2011); 347-358

Fibre level modelling of free water behaviour during wood drying and wettingFibre level modelling of free water behaviour during wood drying and wetting

Salin, Jarl-Gunnar. Maderas-Cienc Tecnol; Vol. 13 No. 2 (2011); 153-162

Evaluating vibrations on a small-scale model of a timber footbridge

Gutemberg de Alcântara Segundinho, Pedro; Alves Dias, Antonio; Rodrigo Carreira, Marcelo. Maderas-Cienc Tecnol; Vol. 13 No. 2 (2011); 143-152

Effectiveness of selected preservatives in protecting ugandan grown eucalyptus grandis wood against termite attack

Ssemaganda, I. E.; Mugabi, P.; Tumwebaze, S. B.. Maderas-Cienc Tecnol; Vol. 13 No. 2 (2011); 135-142

Inclusion of the sorption hysteresis phenomenon in future drying models. Some basic considerations

Salin, Jarl-Gunnar. Maderas-Cienc Tecnol; Vol. 13 No. 2 (2011); 173-182

Mass transfer in medium density fiberboard (MDF) modified by NA+ montmorillonite (NA+MMT) nanoclay

Zahedsheijani, Reza; Gholamiyan, Hadi; Tarmian, Asghar; Yousefi, Hossein. Maderas-Cienc Tecnol; Vol. 13 No. 2 (2011); 163-172

Fisiología de hongos filamentosos: Efecto del Zn y Mn

M. Ibáñez, Claudia. Maderas-Cienc Tecnol; Vol. 13 No. 3 (2011); 359

Estudio del mojado y caracterización superficial por microscopía de barrido laser confocal de chapas de madera obtenidas por desenrollo

Vázquez, Gonzalo; Galiñanes, Cristina; Freire, M. Sonia; Antorrena, G.; González-Alvarez, Julia. Maderas-Cienc Tecnol; Vol. 13 No. 2 (2011); 183-192

Universidad del Bío-Bío: Recent submissions

Sound pressure as a tool in the assessment of the surface roughness on medium density fibreboard rip sawing process

Influence of veneer quality on beech LVL mechanical properties

Developments in undergraduate wood science education at Stellenbosch University, South Africa

Condensed tannin reactivity inhibition by internal rearrangements: Detection by CP-MAS 13C NMR

Lignocellulosic composites from brazilian giant bamboo (Guadua magna) Part 1: Properties of resin bonded particleboards

Chemical modification of cellulose by acylation: Application to adsorption of methylene blue

Timber management practices and timber species used by small scale furniture workshops in Uganda

Fibre level modelling of free water behaviour during wood drying and wettingFibre level modelling of free water behaviour during wood drying and wetting

Evaluating vibrations on a small-scale model of a timber footbridge

Effectiveness of selected preservatives in protecting ugandan grown eucalyptus grandis wood against termite attack

Inclusion of the sorption hysteresis phenomenon in future drying models. Some basic considerations

Mass transfer in medium density fiberboard (MDF) modified by NA+ montmorillonite (NA+MMT) nanoclay

Fisiología de hongos filamentosos: Efecto del Zn y Mn

Estudio del mojado y caracterización superficial por microscopía de barrido laser confocal de chapas de madera obtenidas por desenrollo

Efecto de la carga de sulfito de sodio en el pulpaje NSSC de E. Globulus

Variación radial y longitudinal de la densidad básica en árboles de Eucalyptus regnans de 16 años

Effect and mechanism of nanosize copper oxide on some physical and mechanical properties of flakeboards

Influences of the operating variables of acetosolv pulping on pulp properties of oil palm frond fibres

Weathering performance of particleboards manufactured from blends of forest residues with red pine (Pinus brutia) wood

A correlation between the gas and liquid permeabilities of beech wood heat-treated in hot water and steam mediums

Universidad del Bío-Bío: Recent submissions

Sound pressure as a tool in the assessment of the surface roughness on medium density fibreboard rip sawing process ﻿

Influence of veneer quality on beech LVL mechanical properties ﻿

Developments in undergraduate wood science education at Stellenbosch University, South Africa ﻿

Condensed tannin reactivity inhibition by internal rearrangements: Detection by CP-MAS 13C NMR ﻿

Lignocellulosic composites from brazilian giant bamboo (Guadua magna) Part 1: Properties of resin bonded particleboards ﻿

Chemical modification of cellulose by acylation: Application to adsorption of methylene blue ﻿

Timber management practices and timber species used by small scale furniture workshops in Uganda ﻿

Fibre level modelling of free water behaviour during wood drying and wettingFibre level modelling of free water behaviour during wood drying and wetting ﻿

Evaluating vibrations on a small-scale model of a timber footbridge ﻿

Effectiveness of selected preservatives in protecting ugandan grown eucalyptus grandis wood against termite attack ﻿

Inclusion of the sorption hysteresis phenomenon in future drying models. Some basic considerations ﻿

Mass transfer in medium density fiberboard (MDF) modified by NA+ montmorillonite (NA+MMT) nanoclay ﻿

Fisiología de hongos filamentosos: Efecto del Zn y Mn ﻿

Estudio del mojado y caracterización superficial por microscopía de barrido laser confocal de chapas de madera obtenidas por desenrollo ﻿

Efecto de la carga de sulfito de sodio en el pulpaje NSSC de E. Globulus ﻿

Variación radial y longitudinal de la densidad básica en árboles de Eucalyptus regnans de 16 años ﻿

Effect and mechanism of nanosize copper oxide on some physical and mechanical properties of flakeboards ﻿

Influences of the operating variables of acetosolv pulping on pulp properties of oil palm frond fibres ﻿

Weathering performance of particleboards manufactured from blends of forest residues with red pine (Pinus brutia) wood ﻿

A correlation between the gas and liquid permeabilities of beech wood heat-treated in hot water and steam mediums ﻿

Sound pressure as a tool in the assessment of the surface roughness on medium density fibreboard rip sawing process

Influence of veneer quality on beech LVL mechanical properties

Developments in undergraduate wood science education at Stellenbosch University, South Africa

Condensed tannin reactivity inhibition by internal rearrangements: Detection by CP-MAS 13C NMR

Lignocellulosic composites from brazilian giant bamboo (Guadua magna) Part 1: Properties of resin bonded particleboards

Chemical modification of cellulose by acylation: Application to adsorption of methylene blue

Timber management practices and timber species used by small scale furniture workshops in Uganda

Fibre level modelling of free water behaviour during wood drying and wettingFibre level modelling of free water behaviour during wood drying and wetting

Evaluating vibrations on a small-scale model of a timber footbridge

Effectiveness of selected preservatives in protecting ugandan grown eucalyptus grandis wood against termite attack

Inclusion of the sorption hysteresis phenomenon in future drying models. Some basic considerations

Mass transfer in medium density fiberboard (MDF) modified by NA+ montmorillonite (NA+MMT) nanoclay

Fisiología de hongos filamentosos: Efecto del Zn y Mn

Estudio del mojado y caracterización superficial por microscopía de barrido laser confocal de chapas de madera obtenidas por desenrollo

Efecto de la carga de sulfito de sodio en el pulpaje NSSC de E. Globulus

Variación radial y longitudinal de la densidad básica en árboles de Eucalyptus regnans de 16 años

Effect and mechanism of nanosize copper oxide on some physical and mechanical properties of flakeboards

Influences of the operating variables of acetosolv pulping on pulp properties of oil palm frond fibres

Weathering performance of particleboards manufactured from blends of forest residues with red pine (Pinus brutia) wood

A correlation between the gas and liquid permeabilities of beech wood heat-treated in hot water and steam mediums