Recently added

Optimization of wood machining parameters in cnc routers: Taguchi orthogonal array based simulated angling algorithm

Hazir, Ender; Hüseyin Koc, Kücük. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 493-510

Recommendation of non-destructive sampling method for density estimation of the eucalyptus wood

Andrade de Pádua, Franciane; Otávio Poletto Tomeleri, João; Pires Franco, Mariana; Reinaldo Moreira da Silva, José; Fernando Trugilho, Paulo. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 565-572

Assessment of physical, mechanical, and biological properties of bamboo plastic composite made with polylactic acid

Dehghan, Moein; Faezipour, Mehdi; Azizi, Majid; Zarea Hosseinabadi, Hamid; Bari, Ehsan; D. Nicholas, Darrel. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 599-610

Investigation of an alternative testing protocol to determine the shear strength of bamboo parallel to the grain

Luisa Cantos, Gabrielle; F. Lopez, Luis; M. de Jesus, Richard; Salzer, Corinna; E. O. Garciano, Lessandro. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 559-564

Physicochemical properties of Pinus massoniana wood subjected to silicone oil heat treatment

Edet OKON, Kufre; Ime UDOAKPAN, Ubong. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 531-544

Influence of combined heat treatment and densification on mechanical properties of poplar wood

Düzkale Sözbir, Gonca; Bektaş, İbrahim; Kılıç Ak, Ayşenur. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 481-492

Colorimetría en la madera de Prosopis alba

Cisneros, A. B.; Nisgoski, S.; Moglia, J.G.; Córdoba, M.. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 393-404

Resistance improvement of rubberwood treated with zinc oxide nanoparticles and phenolic resin against white-rot fungi, Pycnoporus sanguineus

Khairun Anwar Uyup, Mohd; Khadiran, Tumirah; Husain, Hamdan; Salim, Sabiha; Abdullah Siam, Nordahlia; Seng Hua, Lee. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 457-466

Variacion del contenido de humedad verde y de la densidad basica de la madera en arboles de Eucalyptus nitens con dimensiones aserrables

Omonte, Margarette; Sáez-Carrillo, Katia; A. Ananías, Rubén; Valenzuela-Hurtado, Luis. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 413-424

Evaluation of degradation in chemical compounds of wood in historical buildings using ft-ir and ft-raman vibrational spectroscopy

Mahdi Moosavi Nejad, Seyed; Madhoushi, Mehrab; Vakili, Mohammad; Rasouli, Davood. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 381-392

Crystallinity of cellulose microfibers derived from Cistus ladanifer and Erica arborea shrubs

Carrión-Prieto, Paula; Martín-Ramos, Pablo; Hernández-Navarro, Salvador; Sánchez-Sastre, Luis F.; Marcos-Robles, José Luís; Martín-Gil, Jesús. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 447-456

Evaluation of dimensional stability, surface roughness, colour, flexural properties and decay resistance of thermally modified Acacia auriculiformis

Shukla, S.R.. Maderas-Cienc Tecnol; Vol. 21 No. 4 (2019); 433-446

Decay resistance of scotch pine wood impregnated with Agaricus campestris bio-protective extract

Yildiz, Sibel; C. Yildiz, Ümit; Yilmaz, Ayşenur. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 405-412

A new approach to wood protection: Preliminary study of biologically synthesized copper oxide nanoparticle formulation as an environmental friendly wood protectant against decay fungi and termites

Shiny, K. S.; Sundararaj, R.; Mamatha, N.; Lingappa, B.. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 347-356

Application of resource efficient and cleaner production through best management practice in a pallet manufacturer sawmill located in the city of Puyo-Ecuador

Vargas, Blanca; Miño, Gloria; Vega, Paúl; Mariño, Jessica. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 367-380

Bio-Coal Production With Agroforestry Biomass In Brazil

de Freitas Fialho, Lucas; de Cássia Oliveira Carneiro, Angélica; Marcia Macedo Ladeira Carvalho, Ana; Gusmão Figueiró, Clarissa; Miguel Simões da Silva, Carlos; Alves Magalhães, Mateus; Costa Peres, Letícia. Maderas-Cienc Tecnol; Vol. 21 No. 3 (2019); 357-366

Portal de revistas académicas chilenas: Recent submissions

Optimization of wood machining parameters in cnc routers: Taguchi orthogonal array based simulated angling algorithm

Recommendation of non-destructive sampling method for density estimation of the eucalyptus wood

Assessment of physical, mechanical, and biological properties of bamboo plastic composite made with polylactic acid

Investigation of an alternative testing protocol to determine the shear strength of bamboo parallel to the grain

Physicochemical properties of Pinus massoniana wood subjected to silicone oil heat treatment

Influence of combined heat treatment and densification on mechanical properties of poplar wood

Colorimetría en la madera de Prosopis alba

Resistance improvement of rubberwood treated with zinc oxide nanoparticles and phenolic resin against white-rot fungi, Pycnoporus sanguineus

Variacion del contenido de humedad verde y de la densidad basica de la madera en arboles de Eucalyptus nitens con dimensiones aserrables

Evaluation of degradation in chemical compounds of wood in historical buildings using ft-ir and ft-raman vibrational spectroscopy

Crystallinity of cellulose microfibers derived from Cistus ladanifer and Erica arborea shrubs

Evaluation of dimensional stability, surface roughness, colour, flexural properties and decay resistance of thermally modified Acacia auriculiformis

Decay resistance of scotch pine wood impregnated with Agaricus campestris bio-protective extract

A new approach to wood protection: Preliminary study of biologically synthesized copper oxide nanoparticle formulation as an environmental friendly wood protectant against decay fungi and termites

Application of resource efficient and cleaner production through best management practice in a pallet manufacturer sawmill located in the city of Puyo-Ecuador

Bio-Coal Production With Agroforestry Biomass In Brazil

Carbon stored by furnishing wood-based products: An Italian case study

Effect of brown rot degradation on mass loss and compressive strength of chinese poplar (Populus simonii)

Relación entre parámetros de producción y propiedades estructurales de madera laminada encolada de Eucalyptus grandis

Analysis of wood products from an added value perspective: The uruguayan forestry case

Portal de revistas académicas chilenas: Recent submissions

Optimization of wood machining parameters in cnc routers: Taguchi orthogonal array based simulated angling algorithm ﻿

Recommendation of non-destructive sampling method for density estimation of the eucalyptus wood ﻿

Assessment of physical, mechanical, and biological properties of bamboo plastic composite made with polylactic acid ﻿

Investigation of an alternative testing protocol to determine the shear strength of bamboo parallel to the grain ﻿

Physicochemical properties of Pinus massoniana wood subjected to silicone oil heat treatment ﻿

Influence of combined heat treatment and densification on mechanical properties of poplar wood ﻿

Colorimetría en la madera de Prosopis alba ﻿

Resistance improvement of rubberwood treated with zinc oxide nanoparticles and phenolic resin against white-rot fungi, Pycnoporus sanguineus ﻿

Variacion del contenido de humedad verde y de la densidad basica de la madera en arboles de Eucalyptus nitens con dimensiones aserrables ﻿

Evaluation of degradation in chemical compounds of wood in historical buildings using ft-ir and ft-raman vibrational spectroscopy ﻿

Crystallinity of cellulose microfibers derived from Cistus ladanifer and Erica arborea shrubs ﻿

Evaluation of dimensional stability, surface roughness, colour, flexural properties and decay resistance of thermally modified Acacia auriculiformis ﻿

Decay resistance of scotch pine wood impregnated with Agaricus campestris bio-protective extract ﻿

A new approach to wood protection: Preliminary study of biologically synthesized copper oxide nanoparticle formulation as an environmental friendly wood protectant against decay fungi and termites ﻿

Application of resource efficient and cleaner production through best management practice in a pallet manufacturer sawmill located in the city of Puyo-Ecuador ﻿

Bio-Coal Production With Agroforestry Biomass In Brazil ﻿

Carbon stored by furnishing wood-based products: An Italian case study ﻿

Effect of brown rot degradation on mass loss and compressive strength of chinese poplar (Populus simonii) ﻿

Relación entre parámetros de producción y propiedades estructurales de madera laminada encolada de Eucalyptus grandis ﻿

Analysis of wood products from an added value perspective: The uruguayan forestry case ﻿

Optimization of wood machining parameters in cnc routers: Taguchi orthogonal array based simulated angling algorithm

Recommendation of non-destructive sampling method for density estimation of the eucalyptus wood

Assessment of physical, mechanical, and biological properties of bamboo plastic composite made with polylactic acid

Investigation of an alternative testing protocol to determine the shear strength of bamboo parallel to the grain

Physicochemical properties of Pinus massoniana wood subjected to silicone oil heat treatment

Influence of combined heat treatment and densification on mechanical properties of poplar wood

Colorimetría en la madera de Prosopis alba

Resistance improvement of rubberwood treated with zinc oxide nanoparticles and phenolic resin against white-rot fungi, Pycnoporus sanguineus

Variacion del contenido de humedad verde y de la densidad basica de la madera en arboles de Eucalyptus nitens con dimensiones aserrables

Evaluation of degradation in chemical compounds of wood in historical buildings using ft-ir and ft-raman vibrational spectroscopy

Crystallinity of cellulose microfibers derived from Cistus ladanifer and Erica arborea shrubs

Evaluation of dimensional stability, surface roughness, colour, flexural properties and decay resistance of thermally modified Acacia auriculiformis

Decay resistance of scotch pine wood impregnated with Agaricus campestris bio-protective extract

A new approach to wood protection: Preliminary study of biologically synthesized copper oxide nanoparticle formulation as an environmental friendly wood protectant against decay fungi and termites

Application of resource efficient and cleaner production through best management practice in a pallet manufacturer sawmill located in the city of Puyo-Ecuador

Bio-Coal Production With Agroforestry Biomass In Brazil

Carbon stored by furnishing wood-based products: An Italian case study

Effect of brown rot degradation on mass loss and compressive strength of chinese poplar (Populus simonii)

Relación entre parámetros de producción y propiedades estructurales de madera laminada encolada de Eucalyptus grandis

Analysis of wood products from an added value perspective: The uruguayan forestry case