Recently added

Relación entre la velocidad de la onda acústica y distintas características de la madera, en árboles de Eucalyptus nitens con dimensiones aserrables

Omonte, Margarette; Valenzuela-Hurtado, Luis. Maderas-Cienc Tecnol; Vol. 22 No. 4 (2020); 559-568

Thermal properties of Acacia mangium cross laminated timber and its gluelines bonded with two structural adhesives

Mohd Yusof, Norwahyuni; Md Tahir, Paridah; Seng Hua, Lee; Athiyah Sabaruddin, Fatimah; Suffian James, Redzuan Mohammad; Asim Khan, Mohd; Ching Hao, Lee; Muhammad Roseley, Adlin Sabrina. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-10

Uptake of insecticides and fungicides by impregnable and refractory coniferous wood species treated with commercial bio-based emulsion gel formulations

Messaoudi, Daouïa; Ruel, Katia; Paul Joseleau, Jean-. Maderas-Cienc Tecnol; Vol. 22 No. 4 (2020); 505-516

Evaluation of Pleurotus ostreatus basidiomes production on pinus sawdust and other agricultural and forestry wastes from patagonia, Argentina

Rugolo, Maximiliano; Lechner, Bernardo; Mansilla, Romina; Mata, Gerardo; Rajchenberg, Mario. Maderas-Cienc Tecnol; Vol. 22 No. 4 (2020); 517-526

Chemical variation of five natural extracts by non-polar solvent

Prayitno, T. A.; Widyorini, R.; Lukmandaru, G.. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-12

Determination of the physical and mechanical properties of wood-cement boards produced with Pinus spp and pozzolans waste

Miranda de Lima, Adauto José; Iwakiri, Setsuo; Trianoski, Rosilani. Maderas-Cienc Tecnol; Vol. 22 No. 4 (2020); 527-536

Effect of the thermal modification and nano-ZnO impregnation on the deterioration of Caribbean pine wood

Couto da Silva, Bruno; Trevisan, Henrique; Aparecida Garcia, Rosilei. Maderas-Cienc Tecnol; Vol. 22 No. 4 (2020); 569-576

Energy gains of eucalyptus by torrefaction process

Leonor Romão, Erica; Ana Conte, Rosa. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-6

Nanocellulose-reinforced phenol-formaldehyde resin for plywood panel production

Cristina Lengowski, Elaine; Bonfatti Júnior, Eraldo Antonio; Dallo, Rafael; Nisgoski, Silvana; Monteiro de Mattos, Jorge Luís; Guilherme Prata, José. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-10

Viability of wood decaying fungal mycelium after microwave radiation of bamboo culm

Kumar Poonia, Pawan; R Deepa, Shivaklara; Kumar, Manish; Kumar, Anil. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-6

A new method for determining air permeabilities of wood-based panels

Tanaka, Takashi. Maderas-Cienc Tecnol; Vol. 23 (2021); 1-11

Economic profitability of particleboards production with a diversified raw material structure

Grzegorzewska, Emilia; Burawska-Kupniewska, Izabela; Boruszewski, Piotr. Maderas-Cienc Tecnol; Vol. 22 No. 4 (2020); 537-548

Variability in the physico-chemical properties of wood from Eucalyptus robusta depending on ecological growing conditions and forestry practices: The case of smallholdings in the Highlands of Madagascar

Mevanarivo, Zo Elia; Ramananantoandro, Tahiana; Tomazello Filho, Mario; Napoli, Alfredo; Razafimahatratra, Andriambelo Radonirina; Razakamanarivo, Herintsitohaina Ramarson; Chaix, Gilles. Maderas-Cienc Tecnol; Vol. 22 No. 4 (2020); 425-438

Analysis of glue line and correlations between density and anatomical characteristics of Eucalyptus grandis × Eucalyptus urophylla glulam

Espósito De Oliveira, Rafael Gonçalves; Gomes Gonçalves, Fabricio; De Alcântara Segundinho, Pedro Gutemberg; Tarcísio Da Silva Oliveira, José; Benigno Paes, Juarez; Silva Chaves, Izabella Luzia; Soares Brito, Alice. Maderas-Cienc Tecnol; Vol. 22 No. 4 (2020); 495-504

The efficiency of Pistacia atlantica gum for increasing resistance of rapeseed oil-heat treated wood to fungal attacks

Mahmoud Kia, Morad; Tarmian, Asghar; Naghi Karimi, Ali; Gholamiyan, Hadi; Abdulkhani, Ali; Reza Mastri Farahani, Mohamad. Maderas-Cienc Tecnol; Vol. 22 No. 4 (2020); 457-466

Enhancing mechanical and surface properties of eucalyptus wood

Pertuzzatti, Anderson; Tondi, Gianluca; Coldebella, Rodrigo; W. Dalla Costa, Henrique; A. Gatto, Darci; L. Missio, André. Maderas-Cienc Tecnol; Vol. 22 No. 4 (2020); 467-476

Durability of eucalypts wood in soil bed and field decay tests

Neto, Pedro Nicó de Medeiros; Benigno Paes, Juarez; Tarcísio da Silva Oliveira, José; Gabriel Missia da Silva, João; Clailson Franco Coelho, José; da Silva Ribeiro, Libânia. Maderas-Cienc Tecnol; Vol. 22 No. 4 (2020); 447-456

Effect of expanded polystyrene content and press temperature on the properties of low-density wood particleboard

Luo, Shupin; Gao, Li; Guo, Wenjing. Maderas-Cienc Tecnol; Vol. 22 No. 4 (2020); 549-558

Influence of nano wollastonite on physical, mechanical and morphological properties of gypsum composites manufactured from bagasse

Hassanpoor Tichi, Ali; Khademieslam, Habibollah; Rezanezhad Divkolae, Mojtaba. Maderas-Cienc Tecnol; Vol. 22 No. 3 (2020); 405-416

Hydrothermal treatments to promote surface inactivation and increased flexibility in three hardwoods

Lemos de Peres, Matheus; de Avila Delucis, Rafael; Beltrame, Rafael; Alberto Gatto, Darci. Maderas-Cienc Tecnol; Vol. 22 No. 4 (2020); 439-446

Maderas: Ciencia y Tecnología: Recent submissions

Relación entre la velocidad de la onda acústica y distintas características de la madera, en árboles de Eucalyptus nitens con dimensiones aserrables ﻿

Thermal properties of Acacia mangium cross laminated timber and its gluelines bonded with two structural adhesives ﻿

Uptake of insecticides and fungicides by impregnable and refractory coniferous wood species treated with commercial bio-based emulsion gel formulations ﻿

Evaluation of Pleurotus ostreatus basidiomes production on pinus sawdust and other agricultural and forestry wastes from patagonia, Argentina ﻿

Chemical variation of five natural extracts by non-polar solvent ﻿

Determination of the physical and mechanical properties of wood-cement boards produced with Pinus spp and pozzolans waste ﻿

Effect of the thermal modification and nano-ZnO impregnation on the deterioration of Caribbean pine wood ﻿

Energy gains of eucalyptus by torrefaction process ﻿

Nanocellulose-reinforced phenol-formaldehyde resin for plywood panel production ﻿

Viability of wood decaying fungal mycelium after microwave radiation of bamboo culm ﻿

A new method for determining air permeabilities of wood-based panels ﻿

Economic profitability of particleboards production with a diversified raw material structure ﻿

Variability in the physico-chemical properties of wood from Eucalyptus robusta depending on ecological growing conditions and forestry practices: The case of smallholdings in the Highlands of Madagascar ﻿

Analysis of glue line and correlations between density and anatomical characteristics of Eucalyptus grandis × Eucalyptus urophylla glulam ﻿

The efficiency of Pistacia atlantica gum for increasing resistance of rapeseed oil-heat treated wood to fungal attacks ﻿

Enhancing mechanical and surface properties of eucalyptus wood ﻿

Durability of eucalypts wood in soil bed and field decay tests ﻿

Effect of expanded polystyrene content and press temperature on the properties of low-density wood particleboard ﻿

Influence of nano wollastonite on physical, mechanical and morphological properties of gypsum composites manufactured from bagasse ﻿

Hydrothermal treatments to promote surface inactivation and increased flexibility in three hardwoods ﻿