Recently added

Optimization project of plasterboard and metalcon profiles for a building in Concepción

Bustamante, Guillermo; Olate, Ramón; Molina, Christian. Obras y Proyectos; Núm. 34 (2023); 69-81

Influence of the column – beam resistant moment ratio on the collapse mechanism of a dual typology building located in a high seismic hazard zone

Gamoneda, Rodolfo; Sariol, José Alejandro; Martínez, Janet Otmara. Obras y Proyectos; Núm. 34 (2023); 29-39

Initial assessment of asphalt mixtures reflective cracking retarder made with asphalt with high incorporation of NFU

Segura, Adrián; Botasso, Gerardo; Raggiotti, Belén; Zapata, Ignacio; Rebolledo, Oscar. Obras y Proyectos; Núm. 34 (2023); 18-28

Wave modeling on a two-dimensional flume using OpenFOAM

Contreras, Carlos; Winckler, Patricio. Obras y Proyectos; Núm. 34 (2023); 6-17

Influence of seismic excitation frequency content on the efficiency of a combined tuned damping

Espinoza, Gilda; Suazo, Álvaro; Vergara, Francisco; Cantillana, José. Obras y Proyectos; Núm. 34 (2023); 40-54

Technical evaluation of block masonry with pozzolanic additions

Roldán, Walter; Soto, Julio. Obras y Proyectos; Núm. 24 (2018); 13-20

Study of the static and seismic performance of a geogrid reinforced soil wall as bridge abutment in Concepción

González, Maribell; Villalobos, Felipe; Méndez, Alejandro; Pablo Carrillo, Pablo Carrillo. Obras y Proyectos; Núm. 24 (2018); 41-52

Environmental flow determination for the River Ñuble considering leisure activities and fish habitat requirements

Toledo, Sofía. Obras y Proyectos; Núm. 24 (2018); 71-80

Experimental study of the basal excitation and saturation degree effect on the pore pressure underneath an earth dam

Pastén, Mario; Salazar, Iván. Obras y Proyectos; Núm. 24 (2018); 53-61

Use of waste water from purification plants in the manufacture of concrete

Nazer, Amin; Guzmán, Alejandro; Bolados, Luis; González, Luis; Pavez, Osvaldo. Obras y Proyectos; Núm. 24 (2018); 21-27

Methodology of decision-making for the selection of subcontracts in the construction industry

Crisóstomo, Andrés; Herrera, Rodrigo F.. Obras y Proyectos; Núm. 24 (2018); 28-40

Transient flow analysis using the method of characteristics MOC with five-point interpolation scheme

Twyman, John. Obras y Proyectos; Núm. 24 (2018); 62-70

Modelling steel-concrete interaction using the extended finite element method

Gutiérrez, Rodrigo; Stempniewsk, Lothar; Fleming, Wagner. Obras y Proyectos; Núm. 24 (2018); 6-12

Risk for accidental leaks of liquefied petroleum gas to workers and community in Nacimiento, Cabrero, La Laja y Mulchén cities (Chile)

Silva, Adrián; Contreras, Rodolfo; Barrandeguy, Margarita. Obras y Proyectos; Núm. 32 (2022); 66-77

Optimization methodology for the use of plasterboard and steel profiles in a housing project

Bustamante, Guillermo; Pino, Isidora; Molina, Christian. Obras y Proyectos; Núm. 32 (2022); 54-65

Application of InSAR deformation monitoring tools to study tailings dam failures

Olguín, Sebastián; Araya, Victor; Suazo Fuentealba, Gonzalo; Villavicencio, Gabriel. Obras y Proyectos; Núm. 31 (2022); 85-94

Research of relationship between light reflectance and surface moisture content in tailings samples using hyperspectral images

Sánchez, Monserrat; Suazo, Gonzalo; Araya, Victor; Villavicencio, Gabriel. Obras y Proyectos; Núm. 31 (2022); 77-84

Geometric scaling of the granulometric curve of granular materials from mining activities

Sanabria, Juan; Jaime, Alberto. Obras y Proyectos; Núm. 31 (2022); 95-103

Application of geostatistical models to dynamic cone tests DPSH Grizzly® data carried out in potentially liquefiable soils in the northern sector of Punta Arenas city

Villarroel, Pablo; Carrasco, Ramón. Obras y Proyectos; Núm. 31 (2022); 45-51

Effect of non-plastic fines on the undrained response of a tailings sand under high pressures

Silva-Contreras, Diego; Ochoa-Cornejo, Felipe. Obras y Proyectos; Núm. 32 (2022); 18-24

Obras y Proyectos: Revista de Ingeniería Civil: Recent submissions

Optimization project of plasterboard and metalcon profiles for a building in Concepción ﻿

Influence of the column – beam resistant moment ratio on the collapse mechanism of a dual typology building located in a high seismic hazard zone ﻿

Initial assessment of asphalt mixtures reflective cracking retarder made with asphalt with high incorporation of NFU ﻿

Wave modeling on a two-dimensional flume using OpenFOAM ﻿

Influence of seismic excitation frequency content on the efficiency of a combined tuned damping ﻿

Technical evaluation of block masonry with pozzolanic additions ﻿

Study of the static and seismic performance of a geogrid reinforced soil wall as bridge abutment in Concepción ﻿

Environmental flow determination for the River Ñuble considering leisure activities and fish habitat requirements ﻿

Experimental study of the basal excitation and saturation degree effect on the pore pressure underneath an earth dam ﻿

Use of waste water from purification plants in the manufacture of concrete ﻿

Methodology of decision-making for the selection of subcontracts in the construction industry ﻿

Transient flow analysis using the method of characteristics MOC with five-point interpolation scheme ﻿

Modelling steel-concrete interaction using the extended finite element method ﻿

Risk for accidental leaks of liquefied petroleum gas to workers and community in Nacimiento, Cabrero, La Laja y Mulchén cities (Chile) ﻿

Optimization methodology for the use of plasterboard and steel profiles in a housing project ﻿

Application of InSAR deformation monitoring tools to study tailings dam failures ﻿

Research of relationship between light reflectance and surface moisture content in tailings samples using hyperspectral images ﻿

Geometric scaling of the granulometric curve of granular materials from mining activities ﻿

Application of geostatistical models to dynamic cone tests DPSH Grizzly® data carried out in potentially liquefiable soils in the northern sector of Punta Arenas city ﻿

Effect of non-plastic fines on the undrained response of a tailings sand under high pressures ﻿